HMC1023LP5E Datasheet PDF - ADI

The HMC1023LP5E is a 6th order, programmable bandwidth, fully calibrated, Dual Low Pass Filter. It features programmable 0 or 10 dB gain and supports arbitrary bandwidths from 5 to 72MHz. When calibrated, the bandwidth is accurate to ±2.5%. Built-in filter bypass option enables wider bandwidths while maintaining programmed gain and common mode control settings. Integrated ADC driver, programmable input impedance and adjustable output common mode voltage from 0.9 to 3V with 2Vppd signal or lower than 0.9V common mode with lower signal swing enables simple interface while achieving maximum performance. Programmable bias settings enable performance/power dissipation trade-off optimized for each application. Filter calibration is accomplished with any reference clock rate from 20 to 80MHz. One time programmable (OTP) memory offers unsurpassed flexibility allowing the user set and forget parameters like gain and bandwidth setting.

● 10dB Low noise figure

● High linearity

● ±2.5% Exceptional 3dB bandwidth accuracy

● 0 or 10dB Programmable gain

● Externally controlled common mode output level

● Automatic filter calibration

● Read/write serial port interface (SPI)

●ESD sensitive device, take proper precaution while handling the device.