| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Frequency | 50MHz ~ 8GHz |
| Number of Pins | 16 Pin |
| Supply Voltage (DC) | 2.70V (min) |
| Case/Package | QFN-16 |
| Supply Current | 17 mA |
| Number of Channels | 1 Channel |
| Number of Positions | 16 Position |
| Power Dissipation | 0.22 W |
| Thermal Resistance | 184 ℃/W |
| Output Voltage (Max) | 2.1 V |
| Input Power (Max) | 12 dBm |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Power Dissipation (Max) | 220 mW |
| Accuracy | ±1 dB |
| Supply Voltage | 2.7V ~ 5.5V |
| Supply Voltage (Max) | 5.5 V |
| Supply Voltage (Min) | 2.7 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Each |
| Operating Temperature | -40℃ ~ 85℃ |
The HMC713LP3E is a 54dB Logarithmic Detector/Controller, ideal for converting the power of RF signals with frequencies in the 50 to 8000MHz range, to a DC voltage, proportional to input power, at its output. The HMC713LP3E employs a successive compression technology which delivers 54dB of dynamic range with high measurement accuracy over a wide input frequency range. As the input signal is increased, successive amplifiers move into saturation one by one creating an accurate approximation of the logarithm function. The outputs of a series of detectors are summed, converted into voltage domain and buffered to drive the OUTP output. For detection mode, the OUTP pin is connected to the VSET input and will provide a nominal logarithmic slope of 17mV/dB and an intercept of -68dBm. The HMC713LP3E can also be used in the controller mode where an external voltage is applied to the VSET pin to create an AGC or APC feedback loop.
ADI
RF Detector 50MHz to 8000MHz 12dBm 16Pin QFN EP T/R
ADI
RF Detector / Controller, IC, 50MHz to 8GHz, 12 dBm Input Power, 2.7V to 5.5V supply, QFN-16
Hittite
Ic Detector/Ctlr Log 54dB 16-Qfn
Hittite
Ic Detector/Ctlr Log 54dB 16-Qfn
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
