Product Details
●The HMC7748 is a multistage power amplifier (PA) that provides 25 W of saturated output power across the band of 2 GHz to 6 GHz. It draws 0.7 A from a 12 V supply and up to 4 A from a 28 V supply. Input signals of as much as −8 dBm are acceptable, and the module has small signal gain of 60 dB.
●The 12 V supply is regulated internally and generates the negative voltage required for the gate bias. Built-in bias sequencing prevents the drain voltages for the amplifier stages from being applied without the negative voltage present, which protects the amplifiers if 28 V is applied without 12 V supply applied.
●An external enable pin causes the module to remain in shutdown mode unless the pin is pulled to ground. This pin provides a means of turning the amplifiers off and on without cycling the power supplies.
●Applications
● Telecom infrastructure
● Test instrumentation
● Military
●### Features and Benefits
● 58 dB typical small signal gain
● 43 dBm typical saturated output power
● 48 dBm typical output IP3
● 6 dB maximum noise figure
● Operates from 12 V and 28 V supplies
● Built-in bias sequencing
● Enable pin to provide shutdown capability
