GENERAL DESCRIPTION
●The ISD5100 ChipCorder Series provide high quality, fully integrated, single-chip Record/Playback solutions for 1- to 16-minute messaging applications that are ideal for use in cellular phones, automotive communications, GPS/navigation systems and other portable products. The ISD5100 Series products are an enhancement of the ISD5000 architecture, providing: 1) the I2C serial port -address, control and duration selection are accomplished through an I2C interface to minimize pin count (ONLY two control lines required); 2) the capability of storing digital data, in addition to analog data. This feature allows customers to store phone numbers, system configuration parameters and message address locations for message management capability; 3) Various internal circuit blocks can be individually powered-up or -down for power saving.
●FEATURES
●Fully-Integrated Solution
●• Single-chip voice record/playback solution
●• Dual storage of digital and analog data
●• Durations
● 8 to 16-minute (ISD5116)
● 4 to 8-minute (ISD5108)
● 2 to 4-minute (ISD5104)
● 1 to 2-minute (ISD5102)
●Low Power Consumption
●• +2.7 to +3.3V (VCC) Supply Voltage
●• Supports 2.0V and 3.0V interface logic
●• Operating Current:
● ICC Play = 15 mA (typical)
● ICC Rec = 30 mA (typical)
● ICC Feedthrough = 12 mA (typical)
●• Standby Current:
● ISB = 1µA (typical)
●• Most stages can be individually powered down to minimize power consumption
●Enhanced Voice Features
●• One or two-way conversation record
●• One or two-way message playback
●• Voice memo record and playback
●• Private call screening
●• In-terminal answering machine
●• Personalized outgoing message
●• Private call announce while on call
●Digital Memory Features
●• Up to 4 Mb available (ISD5116)
●• Up to 2 Mb available (ISD5108)
●• Up to 1 Mb available (ISD5104)
●• Up to 512Kb available (ISD5102)
●• Storage of phone numbers, system configuration parameters and message address table in cellular application
●Easy-to-use and Control
●• No compression algorithm development required
●• User-controllable sampling rates
●• Programmable analog interface
●• Standard & Fast mode I2C serial interface (100kHz – 400 kHz)
●• Fully addressable for multiple messages
●High Quality Solution
●• High quality voice and music reproduction
●• Winbond’s standard 100-year message retention (typical)
●• 100K record cycles (typical) for analog data
●• 10K record cycles (typical) for digital data
●Options
●• Available in die form, TSOP and SOIC and PDIP (ISD5116 Only)
●• Temperature: Commercial – Packaged (0 to +70°C) & die (0 to +50°C); Industrial (-40 to +85°C)
