The IXBD4410/IXBD4411 ISOSMART chipset is designed to control the gates of two Power MOSFETs or Power IGBTs that are connected in a half bridge (phase-leg) configuration for driving multiple-phase motors, or used in applications that require half-bridge power circuits. The IXBD4410/IXBD4411 is a full-feature chipset consisting of two 16-Pin DIP or SO devices interfaced and isolated by two small-signal ferrite pulse transformers. The small-signal transformers provide greater than 1200 V isolation.
●Features
●• 1200 V or greater low-to-high side isolation.
●• Drives Power Systems Operating on up to 575 V AC mains
●• dv/dt immunity of greater than ±50V/ns
●• Proprietary low-to-high side level translation and communication
●• On-chip negative gate-drive supply to ensure Power MOSFET or IGBT turn-off and to prevent gate noise interference
●• 5 V logic compatible HCMOS inputs with hysteresis
●• Available in either the 16-Pin DIP or the 16-Pin wide-body, small-outline plastic package
●• 20 ns switching time with 1000 pF load; 100 ns switching time with 10,000 pF load
●• 100 ns propagation delay time
●• 2 A peak output drive capability
●• Self shut-down of output in response to over-current or short-circuit
●• Under-voltage and over-voltage VDD lockout protection
●• Protection from cross conduction of the half bridge
●• Logic compatible fault indication from both low and high-side driver
●Applications
●• 1- or 3-Phase Motor Controls
●• Switch Mode Power Supplies (SMPS)
●• Uninterruptible Power Supplies (UPS)
●• Induction Heating and Welding Systems
●• Switching Amplifiers
●• General Power Conversion Circuits
