The JTL6048S12 from XP Power is a JTL60 series 60W single output DC to DC converter. It has wide 4:1 input range and 2inch x 1inch footprint. The converter features line regulation of ±0.5%, load regulation of 0.5% (from 0% to full load) and cross regulation of ±5%. The DC to DC converter has 140% overload protection and continuous hicc-up mode short circuit protection with auto recovery and overvoltage protection. The input to output isolation of 1600VDC, isolation resistance of 10^9ohm and isolation capacitance of 2200pF.
● Input voltage range from 18V to 75V (48V nominal input voltage)
● Output voltage of 12V and output current of 5A
● Input current of 25mA at no load and 1350mA at full load
● 15V OVP setting and 225KHz switching frequency
● Efficiency of 92% and maximum capacitive load of 5850µF
● ±10% output trim and initial set accuracy of ±1% at full load
● Full load at 50°C ambient and remote on/off
● Start-up time of 60ms and ripple & noise of 100mV pk-pk
● Dimension is 2inch x 1inch x 0.45inch (50.8mm x 25.4mm x 11.5mm) and weight is 45g
● Operating temperature range from -40°C to 85°C
