L9942XP1TR Datasheet PDF - ST Microelectronics

Description

●The L9942 is an integrated stepper motor driver for bipolar stepper motors with microstepping and programmable current profile look-up-table to allow a flexible adaptation of the stepper motor characteristics and intended operating conditions.

●It is possible to use different current profiles depending on target criteria: audible noise, vibrations, rotation speed or torque.

●Features

●■ Two full bridges for max. 1.3 A load (RDSON= 500 m)

●■ Programmable current waveform with look-up table: 9 entries with 5 bit resolution

●■ Current regulation by integrated PWM controller and internal current sensing

●■ Programmable stepping mode: full, half, mini and microstepping

●■ Programmable slew rate for EMC and power dissipation optimization

●■ Programmable Fast-, Slow-, Mixed- and Auto Decay Mode

●■ Full-scale current programmable with 3 bit resolution

●■ Programmable stall detection

●■ Step clock input for reduced µController requirements

●■ Very low current consumption in standby mode IS< 3 µA, typ. Tj 85 °C

●■ All outputs short circuit protected with openload, overload current, temperature warning and thermal shutdown

●■ The PWM signal of the internal PWM controller is available as digital output.

●■ All parameters are guaranteed for 3 V < Vcc < 5.3 Vand for 7 V < Vs < 20 V

●Applications