The LAN9512-JZX is an USB 2.0 hub and 10/100 Ethernet Controller. It is targeted as a high performance, low cost USB/Ethernet and USB/USB connectivity solution. This is specifically designed to provide system architects with a low-cost, power-efficient, small-footprint USB to Ethernet and multi-port USB connectivity solution. The LAN9512 contain a high speed USB 2.0 hub with two fully-integrated downstream USB 2.0 PHYs, an integrated upstream USB 2.0 PHY, a 10/100 Ethernet MAC/PHY controller and an EEPROM controller. It offers Microchip"s highest level of USB 2.0 and 10/100 Ethernet compliance and interoperability. Additionally, this device simplifies system design by leveraging the existing USB stack and reducing the PCB footprint by up to 65% compared to discrete competitive solutions.
● Fully-integrated 2-port high speed USB 2.0 hub and 10/100 Ethernet controller
● Built-in ±8kV/15kV contact/air discharge ESD protection on both USB and Ethernet PHYs
● 24MHz Clock out provided to connect additional USB hubs
● Integrated 10/100 Ethernet MAC with full-duplex support
● Integrated 10/100 Ethernet PHY with HP Auto-MDIX
● Implements reduced power operating modes
● Integrated USB termination pull-up/pull-down resistors
● Internal short-circuit protection of USB differential signal pins
● Full- and half-duplex support with flow control
● Supports bus-powered and self-powered operation
●ESD sensitive device, take proper precaution while handling the device.
