General Description
●The LM140 monolithic 3-terminal positive voltage regulators employ internal current limiting, thermal shutdown and safe-area compensation, making them essentially indestructible. If adequate heat sinking is provided, they can deliver over 1.0A output current. They are intended as fixed voltage regulators in a wide range of applications including local (on-card) regulation for elimination of noise and distribution problems associated with single-point regulation. In addition to use as fixed voltage regulators, these devices can be used with external components to obtain adjustable output voltages and currents.
●Considerable effort was expended to make the entire series of regulators easy to use and minimize the number of external components. It is not necessary to bypass the output, although this does improve transient response. Input bypassing is needed only if the regulator is located far from the filter capacitor of the power supply.
National
8 Pages / 0.02 MByte
TI
LDO Regulator Pos 12V 1A 3Pin(2+Tab) TO-3 Tray
Semelab
Standard Regulator Pos 12V 1A 3Pin(2+Tab) TO-3
National Semiconductor
IC VREG 12 V FIXED POSITIVE REGULATOR, MBFM2, METAL CAN, TO-3, 2 PIN, Fixed Positive Single Output Standard Regulator
National
3-Terminal Positive Regulators
TI
LDO Regulator Pos 12V 1A 3Pin(2+Tab) TO-3 Tray
TI
LDO Regulator Pos 12V 1A 3Pin(2+Tab) TO-3 Tray
Semelab
POSITIVE VOLTAGE REGULATOR 1A
National Semiconductor
Standard Regulator Pos 12V 1A 3Pin(2+Tab) TO-3 Tray
Semelab
1A, 12V Positive Voltage Regulator
National
VOLTAGE REGULATOR, +5 VOLTS AT 1A
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
