| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Frequency | 2.00 MHz |
| Number of Pins | 8 Pin |
| Supply Voltage (DC) | 14.0V (max) |
| Case/Package | VSSOP-8 |
| Number of Outputs | 1 Output |
| Output Voltage | 1.24V ~ 14V |
| Output Current | 1 A |
| Number of Positions | 8 Position |
| Switching Frequency | 2 MHz |
| Topology | Boost, Flyback |
| Input Voltage (Max) | 14 V |
| Input Voltage (Min) | 1.2 V |
| Output Voltage (Max) | 14 V |
| Output Voltage (Min) | 1.24 V |
| Output Current (Max) | 1 A |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | 40 ℃ |
| Input Voltage | 14 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
The LM2621MM is a high efficiency Step-up DC-DC Switching Regulator for battery-powered and low input voltage systems. It accepts an input voltage between 1.2V and 14V and converts it into a regulated output voltage. The output voltage can be adjusted between 1.24 and 14V. It has an internal 0.17R N-channel MOSFET power switch. Efficiencies up to 90% are achievable using the LM2621. The high switching frequency (adjustable up to 2MHz) of the regulator allows for tiny surface mount inductors and capacitors. Because of the unique constant-duty-cycle gated oscillator topology very high efficiencies are realized over a wide load range. The supply current is reduced to 80µA because of the BiCMOS process technology. In the shutdown mode, the supply current is less than 2.5µA.
● Up to 90% regulator efficiency
● 80µA Typical operating current
● 0.17R Internal MOSFET
●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
TI
LM2621 Low Input Voltage, Step-Up DC-DC Converter
National Semiconductor
Low Input Voltage, Step-Up DC-DC Converter
National
Low Input Voltage, Step-Up DC-DC Converter
TI
Conv DC-DC 1.2V to 14V Step Up Single-Out 1.24V to 14V 1A 8Pin VSSOP T/R
TI
Conv DC-DC 1.2V to 14V Step Up Single-Out 1.24V to 14V 1A 8Pin VSSOP T/R
TI
TEXAS INSTRUMENTS LM2621EVAL/NOPB Evaluation Board, Adjustable Step Up DC-DC Converter, Works With 0.65V DC Input
TI
Conv DC-DC 1.2V to 14V Step Up Single-Out 1.24V to 14V 1A 8Pin VSSOP T/R
TI
Conv DC-DC 1.2V to 14V Step Up Single-Out 1.24V to 14V 1A 8Pin VSSOP T/R
National Semiconductor
IC, STEP-UP DC-DC CONVERTER, 8-SOIC
National Semiconductor
IC MULTI CONFIG ADJ 1A 8MSOP
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
