| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 3 Pin |
| Supply Voltage (DC) | 35.0V (max) |
| Current Rating | 1.00 A |
| Case/Package | TO-263-4 |
| Number of Outputs | 1 Output |
| Input Voltage (DC) | 10.0V (max) |
| Output Voltage | 5 V |
| Output Current | 1 A |
| Supply Current | 8 mA |
| Number of Positions | 3 Position |
| Quiescent Current | 8 mA |
| Output Capacitor Type | Ceramic |
| voltage rating | 2V @1A |
| Number of Regulated Outputs | 1 Output |
| Input Voltage (Max) | 35 V |
| Input Voltage (Min) | 7.5 V |
| Output Voltage (Min) | 5 V |
| Output Current (Max) | 1 A |
| Operating Temperature (Max) | 70 ℃ |
| Operating Temperature (Min) | 0 ℃ |
| Accuracy | ±2 % |
| Input Voltage | 35V ~ 7.5V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 10.16 mm |
| Size-Width | 8.64 mm |
| Size-Height | 4.57 mm |
| Operating Temperature | 0℃ ~ 125℃ |
The LM340S-5.0/NOPB is a monolithic 3-terminal Positive Voltage Regulator employs internal current-limiting, thermal shutdown and safe-area compensation, making them essentially indestructible. If adequate heat sinking is provided, they can deliver over 1.0A output current. They are intended as fixed voltage regulators in a wide range of applications including local (on-card) regulation for elimination of noise and distribution problems associated with single-point regulation. In addition to use as fixed voltage regulators, these devices can be used with external components to obtain adjustable output voltages and currents. Considerable effort was expended to make the entire series of regulators easy to use and minimize the number of external components. It is not necessary to bypass the output, although this does improve transient response. Input bypassing is needed only if the regulator is located far from the filter capacitor of the power supply.
● Complete specifications at 1A load
● Internal thermal overload protection
● Internal short-circuit current limit
● Output transistor safe area protection
● P+ Product enhancement tested
●Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
