TYPE | DESCRIPTION |
---|
Mounting Style | Surface Mount |
Frequency | 1 MHz |
Number of Pins | 24 Pin |
Case/Package | WFQFN-24 |
Number of Outputs | 1 Output |
Input Voltage (DC) | 3.00V ~ 5.80V |
Output Voltage | 6 V |
Output Current | 6 A |
Number of Positions | 24 Position |
Quiescent Current | 1.00 mA |
Number of Regulated Outputs | 1 Output |
Output Power | 30.0 W |
Switching Frequency | 1 MHz |
Topology | Buck |
Input Voltage (Max) | 5.8 V |
Input Voltage (Min) | 3 V |
Output Current (Max) | 6 A |
Operating Temperature (Max) | 125 ℃ |
Operating Temperature (Min) | -40 ℃ |
Supply Voltage | 12 V |
Input Voltage | 3V ~ 5.8V |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Tape & Reel (TR) |
Size-Length | 4 mm |
Size-Width | 4 mm |
Size-Height | 0.8 mm |
Operating Temperature | -40℃ ~ 125℃ (TJ) |
The LM3433SQ/NOPB is a common anode capable high brightness LED Driver with high frequency dimming. It provides a constant current for illuminating high power LEDs. The output configuration allows the anodes of multiple LEDs to be tied directly to the ground referenced chassis for maximum heat sink efficacy. The high frequency capable architecture allows the use of small external passive components and no output capacitor while maintaining low LED ripple current. Two control inputs are used to modulate LED brightness. An analogue current control input is provided so the LM3433 can be adjusted to compensate for LED manufacturing variations or colour temperature correction. The other input is a logic level PWM control of LED current. The PWM functions by shorting out the LED with a parallel switch allowing high PWM dimming frequencies. High frequency PWM dimming allows digital colour temperature control, interference blanking, field sequential illumination and brightness control.
● Control inputs referenced to the LED anode
● No output capacitor required
● Soft-start
● Adaptive programmable on time allows for constant ripple current
● >30kHz PWM frequency capable
● 1mA Typical low IQ
● Green product and no Sb/Br
TI
Common Anode Capable High Brightness LED Driver with High Frequency Dimming
TI
TEXAS INSTRUMENTS LM3433SQ/NOPB LED Driver, Buck (Step Down), 3V to 5.8V input, 1 Output, 1MHz switch-freq., 6V/3A out, LLP-24
TI
LM3433 4A to 20A LED Driver Evaluation Board
TI
Common Anode Capable High Brightness LED Driver with High Frequency Dimming 24-WQFN -40℃ to 125℃
TI
LM3433 LED Driver Evaluation Board
TI
LM3433 4A to 20A LED Driver Evaluation Board
TI
Evaluation Kit For Common Anode Capable High Brightness LED Driver With High Frequency Dimming
National Semiconductor
National Semiconductor (TI) LED Lighting Drivers COMMON ANODE CAP HI BRIGHTNESS LED DRVR
TI
LED DRVR 1Segment 12V 24Pin LLP EP T/R
National Semiconductor
IC LED DRIVER HIGH BRIGHT 24-LLP
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.