| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 8 Pin |
| Supply Voltage (DC) | 28.0V (max) |
| Case/Package | SOIC-8 |
| Input Voltage (DC) | 28.0 V |
| Output Voltage | 2V ~ 20V |
| Output Current | 1500 mA |
| Number of Positions | 8 Position |
| Output Voltage (Max) | 20 V |
| Output Voltage (Min) | 2 V |
| Output Current (Max) | 1.5 A |
| Output Current (Min) | 930 mA |
| Operating Temperature (Max) | 70 ℃ |
| Operating Temperature (Min) | 0 ℃ |
| Supply Voltage | 6.2V ~ 28V |
| Supply Voltage (Min) | 8 V |
| Input Voltage | 28 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Each |
| Size-Length | 10.01 mm |
| Size-Width | 3.988 mm |
| Operating Temperature | 0℃ ~ 70℃ |
The LT1510CS8#PBF is a constant-voltage/constant-current Battery Charger features smallest, sim-plest and most efficient solution to fast-charge modern rechargeable batteries including Li-ion, nickelmetal-hydride (NiMH) and nickel-cadmium (NiCd) that require constant-current and/or constant-voltage charging. The internal switch is capable of delivering 1.5A DC current (2A peak current). The 0.1R on board current sense resistor makes the charging current programming very simple. One resistor is required to set the full charging current (1.5A) to within 5% accuracy. The LT1510 with 0.5% reference voltage accuracy meets the critical constant-voltage charging requirement for lithium cells. The LT1510 can charge batteries ranging from 2 to 20V. Ground sensing of current is not required and the battery"s negative terminal can be tied directly to ground. A saturating switch running at 200kHz gives high charging efficiency and small inductor size.
● Precision 0.5% voltage reference for voltage mode charging or overvoltage protection
● Current sensing can be at either terminal of the battery
● Charging current soft start
● Shutdown control
● 3% Typical charging current accuracy
● 3µA Low reverse battery drain current
Linear Technology
1 Pages / 0.71 MByte
Linear Technology
4 Pages / 0.19 MByte
Linear Technology
Battery Charger Li-Ion/NiCD/NiMH 1500mA 2V to 20V 8Pin SOIC N
ADI
Power Supply Support Circuit, Adjustable, 1 Channel, BIPolar, PDSO8
Linear Technology
LINEAR TECHNOLOGY LT1510CS8#PBF Battery Charger for 12 Cells of Li-Ion, NiCd, NiMH battery, 28V input, 20V / 1.5A charge, SOIC-8
ADI
Constant-Voltage/Constant-Current Battery Charger
ADI
Constant-Voltage/Constant-Current Battery Charger
Linear Technology
Battery Charger Li-Ion/NiCD/NiMH 1500mA 2V to 20V 8Pin SOIC N T/R
Linear Technology
Battery Charger Li-Ion/NiCD/NiMH 1500mA 2V to 20V 8Pin SOIC N T/R
ADI
Power Supply Support Circuit, Adjustable, 1 Channel, BIPolar, PDSO8
Linear Technology
Constant-voltage/constant-current Battery Charger
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
