The LTC1775IS#PBF is a synchronous step-down Switching Regulator Controller drives external N-channel power MOSFETs using few external components. current-mode control with MOSFET VDS sensing eliminates the need for a sense resistor and improves efficiency. Largely similar to the LTC1625, the LTC1775 has twice the maximum sense voltage for high current applications. The frequency of a nominal 150kHz internal oscillator can be synchronized to an external clock over a 1.5:1 frequency range. Burst mode operation at low load currents reduces switching losses and low dropout operation extends operating time in battery-powered systems. A forced continuous mode control pin can assist secondary winding regulation by disabling Burst Mode operation when the main output is lightly loaded. Fault protection is provided by foldback current limiting and an output overvoltage comparator. An external capacitor attached to the RUN/SS pin provides soft start capability for supply sequencing.
● Highest efficiency current mode controller
● No sense resistor required
● 300mV Maximum current sense voltage
● Stable high current operation
● Dual N-channel MOSFET synchronous drive
● Programmable fixed frequency with injection lock
● Forced continuous mode control pin
● Optional programmable soft start
● Pin selectable output voltage
● Foldback current limit
● Output overvoltage protection
● <30µA Logic controlled micropower shutdown
