TYPE | DESCRIPTION |
---|
Mounting Style | Surface Mount |
Number of Pins | 10 Pin |
Case/Package | TDFN-10 |
Number of Outputs | 1 Output |
Input Voltage (DC) | 3.60V (max) |
Output Voltage | 0.5V ~ 1.5V |
Output Current | 2 A |
Number of Positions | 10 Position |
Power Dissipation | 1951 mW |
Quiescent Current | 0.7 mA |
voltage rating | 350 mV |
Input Voltage (Max) | 3.6 V |
Input Voltage (Min) | 1.1 V |
Output Voltage (Max) | 1.5 V |
Output Voltage (Min) | 500 mV |
Output Current (Max) | 3 A |
Operating Temperature (Max) | 85 ℃ |
Operating Temperature (Min) | -40 ℃ |
Power Dissipation (Max) | 1951 mW |
Supply Voltage (Max) | 3.6 V |
Supply Voltage (Min) | 1.1 V |
Input Voltage | 1.1V ~ 3.6V |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Cut Tape (CT) |
Operating Temperature | -40℃ ~ 85℃ |
The MAX1510ETB+T is a low voltage DDR Linear regulators in 10 pin TDFN package. The DDR linear regulators source and sink up to 3A peak (typ) using internal n-channel MOSFETs. This linear regulator deliver an accurate 0.5V to 1.5V output from a low-voltage power input. The MAX1510 use a separate 3.3V bias supply to power the control circuitry and drive the internal n-channel MOSFETs. The device provides current and thermal limits to prevent damage to the linear regulator. Additionally, the device generates a power-good (PGOOD) signal to indicate that the output is in regulation. During start-up, PGOOD remains low until the output is in regulation for 2ms (typ). The internal soft-start limits the input surge current. The MAX1510 power the active-DDR termination bus that requires a tracking input reference. The device can also be used in low-power chipsets and graphics processor cores that require dynamically adjustable output voltages.
● Supply voltage range is 1.1V to 3.6V(power input) and 2.7V to 3.6V(bias supply)
● Operating temperature range from -40°C to 85°C
● Load regulation error is ±15mV (max)
● Thermal-fault protection
● Quiescent supply current is 0.4mA and shutdown supply current is 0.1µA at power input
● Ceramic or polymer output capacitors
Maxim Integrated
13 Pages / 0.45 MByte
Maxim Integrated
26 Pages / 0.48 MByte
Maxim Integrated
13 Pages / 1.86 MByte
Maxim Integrated
Low-Voltage DDR Linear RegulatorsLow-Cost, Low-Voltage DDR Linear Regulators Source and Sink Up to 3A Peak (typ) Using Internal n-Channel MOSFETs
Maxim Integrated
MAXIM INTEGRATED PRODUCTS MAX1510ETB+T LDO Voltage Regulator, Adjustable, 1.1V to 3.6V input, 350mV drop., 0.5V to 1.5V/2A out, TDFN-10
Maxim Integrated
LDO Regulator Pos 0.6V to 5.2V 2A 15Pin WLP T/R
Maxim Integrated
LDO Regulator Pos 0.6V to 5.2V 3A 15Pin WLP T/R
Maxim Integrated
LDO Regulator Pos 0.5V to 1.5V 3A 10Pin TDFN EP
Maxim Integrated
LDO Regulator Pos 0.5V to 1.5V 3A 10Pin TDFN EP
Maxim Integrated
Small 1A, Low-Dropout Linear Regulator in a 2.7mm 1.6mm Package
Maxim Integrated
LDO Regulator Pos 0.6V to 5.2V 2A 15Pin WLP T/R
Maxim Integrated
LDO Regulator Pos 0.5V to 1.5V 3A 10Pin TDFN EP T/R
Maxim Integrated
Evaluation Kit for the MAX15101, MAX15102, and MAX15103.
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.