The MAX7322ATE+ is an I2C port expander with 4 push-pull outputs and 4 inputs with selectable internal pull-ups in 16 pin TQFN package. Input ports are overvoltage protected to +6V and have transition detection with interrupt output. The four input ports are continuously monitored for state changes (transition detection). The interrupt is latched allowing detection of transient changes. Any combination of inputs can be selected using the interrupt mask to assert open-drain active-low INT output. The four push-pull outputs are rated to sink 20mA and are capable of driving LEDs. The active-low RST input clears the serial interface by terminating any I2C communication to or from MAX7322. The device uses two address inputs with four level logics to allow 16 I2C slave addresses. The slave address also sets the power-up default logic state for four output ports and enables or disables internal 40Kohm pull-ups for input ports.
● Supply voltage range is 1.71V to 5.5V
● Automotive temperature range from -40°C to 125°C
● 400KHz I2C serial interface
● 4 input ports with maskable, latching transition detection
● Transient changes are latched by allowing detection between read operations
● Active-low INT output alerts change on any selection of inputs
● AD0 and AD2 inputs select from 16 slave addresses
● Low standby current of 0.6µA
● Supply current (interface running) of 23µA (fSCL = 400KHz, other digital inputs at V+)
