The MAX9203ESA+ is a low cost, 7ns, low power voltage comparator in 8 pin NSOIC package. This high speed, low power, single comparator feature TTL logic outputs with active internal pull-ups. Fast propagation delay (7ns typical at 5mV overdrive) makes this device ideal for fast A/D converters and sampling circuits, line receivers, V/F converters and many other data-discrimination, signal restoration applications. The comparator can be powered from separate analogue and digital power supplies or from a single combined supply voltage. The analogue input common mode range includes the negative rail allowing ground sensing when powered from a single supply. It consumes only 9mW per comparator when powered from a +5V supply. It features output latches with TTL compatible inputs. The comparator output states are held when the latch inputs are driven low.
● Supply voltage range is 5V to 10V, ±4.75V to ±5.25V
● Operating temperature range from -40°C to 85°C
● Separate analogue and digital supplies
● Input offset voltage is 1mV
● Input bias current is 1.25µA and input offset current is 50nA
● Power supply rejection ratio is 50µV/V and common mode rejection ratio is 50µV/V
