MC100ELT25DR2G Datasheet PDF - ON Semiconductor

The MC10ELT/100ELT25 is a differential ECL to TTL translator. Because ECL levels are used, a +5 V, -5.2 V (or -4.5 V) and ground are required. The small outline 8-lead package and the single gate of the ELT25 makes it ideal for those applications where space, performance and low power are at a premium. pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to V as a switching reference voltage. V may also rebias AC coupled inputs. When used, decouple V via a 0.01 F capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VThe 100 Series contains temperature compensation.

●Features

●---

● |

● 2.6ns Typical Propagation Delay

● 100 MHz FMAX CLK

● 24 mA TTL Outputs

● Flow Through Pinouts

● ESD Protection: >1 KV HBM, > 400 V MM

● Operating Range: VCC= 4.5 V to 5.5 V with GND= 0 V; VEE= -4.2 V to -5.7 V with GND= 0 V

● Internal Input Pulldown Resistors

● Q Output will default HIGH with inputs open or < 1.3 V

● Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test

● Moisture Sensitivity Level 1

●For Additional Information, see Application Note

●AND8003/D

● Flammability Rating: UL-94 code V-0 @ 1/8",

●Oxygen Index 28 to 34

● Transistor Count = 38 devices

● Pb-Free Packages are Available