MKL15Z128VLK4 Datasheet PDF - NXP

The MKL15Z128VLK4 is a 32-bit Kinetis KL1x Baseline Ultra-low-power Microcontroller based on ARM Cortex-M0+ RISC architecture core operates at a maximum frequency of 48MHz. The device incorporates 128kB internal flash, 16kB internal RAM, one 16-bit SAR A/D converter, one 12-bit D/A converter, general purpose PWM and 70 general-purpose I/O pins. This device also features communication interfaces like three UART modules, two SPI modules and two I2C modules.

● 48MHz ARM Cortex-M0+ core

● Nine low-power modes to provide power optimization based on application requirements

● COP software watchdog

● 4-channel DMA controller, supporting up to 63 request sources

● Low-leakage wakeup unit

● SWD debug interface and micro trace buffer

● Bit manipulation engine

● Multi-purpose clock source

● 1kHz LPO clock

● Low-power hardware touch sensor interface (TSI)

● Analog comparator (CMP) containing a 6-bit DAC and programmable reference input

● 6-channel Timer/PWM (TPM)

● Two 2-channel Timer/PWM modules

● Periodic interrupt timers

● 16-bit Low-power timer (LPTMR)

● Real-time clock

● 80-bit Unique identification number per chip