The Texas InstrumentsMSP430 family of ultralow-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portablemeasurement applications. The devices feature a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency.The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6µs.
●The MSP430F471xx series are microcontroller configurations targeted to single-phase and poly-phase electricity meters with three, six, or seven 16-bit sigma-delta A/D converters. Each channel has a differential input pair and programmable input gain. Also integrated are two 16-bit timers, four universal serial communication interfaces (USCI), DMA, 68 I/O pins, and a liquid crystal driver (LCD) with integrated contrast control.
● Low Supply-Voltage Range: 1.8 V to 3.6 V
● Ultralow Power Consumption
● Active Mode: 350 µA at 1 MHz, 2.2 V
● Standby Mode: 1.1 µA
● Off Mode (RAM Retention): 0.2 µA
● Five Power-Saving Modes
● Wake-Up From Standby Mode in Less Than 6 µs
● 16-Bit RISC Architecture, 62.5-ns Instruction Cycle Time
● Three-Channel Internal DMA
● Three, Six or Seven 16-Bit Sigma-Delta Analog-to-Digital (A/D)
●Converters With Differential PGA Inputs
● 16-Bit Timer_B With Three Capture/Compare-With-Shadow Registers
● 16-Bit Timer_A With Three Capture/Compare Registers
● On-Chip Comparator
● Four Universal Serial Communication Interface (USCI) Modules
● USCI_A0 and USCI_A1
● Enhanced UART Supporting Auto-Baudrate Detection
● IrDA Encoder and Decoder
● Synchronous SPI
● USCI_B0 and USCI_B1
● I2C
● Synchronous SPI
● Integrated LCD Driver With Contrast Control for Up to 160 Segments
● Basic Timer With Real-Time Clock Feature
● 32-Bit Hardware Multiplier
● Brownout Detector
● Supply Voltage Supervisor/Monitor With Programmable Level Detection
● Serial Onboard Programming, No External Programming Voltage Needed
●Programmable Code Protection by Security Fuse
● Bootstrap Loader
● On-Chip Emulation Module
● Family Members Include
● MSP430F47163: 92KB Flash, 4KB RAM
●3 Sigma-Delta ADCs
● MSP430F47173: 92KB Flash, 8KB RAM
●3 Sigma-Delta ADCs
● MSP430F47183: 116KB Flash, 8KB RAM
●3 Sigma-Delta ADCs
● MSP430F47193: 120KB Flash, 4KB RAM
●3 Sigma-Delta ADCs
● MSP430F47126: 56KB Flash, 4KB RAM
●6 Sigma-Delta ADCs
● MSP430F47166: 92KB Flash, 4KB RAM
●6 Sigma-Delta ADCs
● MSP430F47176: 92KB Flash, 8KB RAM
●6 Sigma-Delta ADCs
● MSP430F47186: 116KB Flash, 8KB RAM
●6 Sigma-Delta ADCs
● MSP430F47196: 120KB Flash, 4KB RAM
●6 Sigma-Delta ADCs
● MSP430F47127: 56KB Flash, 4KB RAM
●7 Sigma-Delta ADCs
● MSP430F47167: 92KB Flash, 4KB RAM
●7 Sigma-Delta ADCs
● MSP430F47177: 92KB Flash, 8KB RAM
●7 Sigma-Delta ADCs
● MSP430F47187: 116KB Flash, 8KB RAM
●7 Sigma-Delta ADCs
● MSP430F47197: 120KB Flash, 4KB RAM
●7 Sigma-Delta ADCs
● Available in a 100-Pin Plastic Quad Flatpack (QFP) Package
● For Complete Module Descriptions, See the _MSP430x4xx Family Users Guide_,
●Literature Number SLAU056
● For E-Meter Reference Design and Software, See _Implementation of aThree-Phase Electronic Watt-Hour Meter using the MSP430F471xx_, Literature Number SLAA409
