The MSP430i204x, MSP430i203x, MSP430i202x devices consist of a powerful 16-bit RISC CPU, a DCO-based clock system that generates system clocks, a power management module (PMM) with built-in voltage reference and voltage monitor, two to four 24-bit sigma-delta analog-to-digital converters (ADCs), a temperature sensor, a 16-bit hardware multiplier, two 16-bit timers, one eUSCI-A module and one eUSCI-B module, a watchdog timer (WDT), and up to 16 I/O pins.
● Supply Voltage Range 2.2 V to 3.6 V
● 16-Bit RISC Architecture, up to 16.384-MHz System Clock
● Power Consumption
● Active Mode (AM):
●All System Clocks Active
●275 µA/MHz at 16.384-MHz, 3.0 V, Flash Program Execution (Typical)
● Standby Mode (LPM3):
●Watchdog Timer Active, Full RAM Retention
●210 µA at 3.0 V (Typical)
● Off Mode (LPM4):
●Full RAM Retention
●70 µA at 3.0 V (Typical)
● Shutdown Mode (LPM4.5):
●75 nA at 3.0 V (Typical)
● Wake Up From Standby Mode in 1 µs
● Memories
● Up to 32KB of Flash Main Memory
● 1KB of Flash Information Memory
● Up to of 2KB of RAM
● Power Management System
● Integrated LDO With 1.8-V Regulated Core Supply Voltage
● Supply Voltage Monitor With Programmable Level Detection
● Brownout Detector
● Built-in Voltage Reference
● Temperature Sensor
● Clock System
● 16.384-MHz Internal DCO
● DCO Operation With Internal or External Resistor
● External Digital Clock Source
● Up to Four 24-Bit Sigma-Delta Analog-to-Digital Converters (ADCs) With Differential PGA Inputs
● Two 16-Bit Timers With Three Capture/Compare Registers Each
● Enhanced Universal Serial Communication Interfaces (eUSCIs)
● eUSCI_A0
● Enhanced UART With Automatic Baud-Rate Detection
● IrDA Encoder and Decoder
● Synchronous SPI
● eUSCI_B0
● Synchronous SPI
● I2C
● 16-Bit Hardware Multiplier
● Serial Onboard Programming, No External Programming Voltage Needed
● Programmable Code Protection
● On-Chip Emulation Module
● Available in 28-Pin TSSOP (PW) and 32-Pin VQFN (RHB) Packages
● For Complete Module Descriptions, See the MSP430i2xx Family User"s Guide (SLAU335)
