Overview
●The NX3L4684 is a dual low-ohmic single-pole double-throw analog switch, suitable for use as an analog or digital multiplexer/demultiplexer. Each switch has a digital select input (nS), two independent inputs/outputs (nY0 and nY1) and a common input/output (nZ).
●Schmitt trigger action at the digital inputs makes the circuit tolerant to slower input rise and fall times. Low threshold digital inputs allows this device to be driven by 1.8 V logic levels in 3.3 V applications without significant increase in supply current ICC. This makes it possible for the NX3L4684 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level translation. The NX3L4684 allows signals with amplitude up to VCC to be transmitted from nZ to nY0 or nY1; or from nY0 or nY1 to nZ. Its low ON resistance (0.3 Ω for Y0 port, 0.5 Ω for Y1 port) and flatness (0.1 Ω) ensures minimal attenuation and distortion of transmitted signals.
●MoreLess
●## Features
● Wide supply voltage range from 1.4 V to 4.3 V
● Very low ON resistance (peak) for Y0 port:
● 0.8 Ω (typical) at VCC = 1.4 V
● 0.5 Ω (typical) at VCC = 1.65 V
● 0.3 Ω (typical) at VCC = 2.3 V
● 0.25 Ω (typical) at VCC = 2.7 V
● 0.25 Ω (typical) at VCC = 4.3 V
● Break-before-make switching
● High noise immunity
● ESD protection:
● HBM JESD22-A114F Class 3A exceeds 4000 V
● MM JESD22-A115-A exceeds 200 V
● CDM AEC-Q100-011 revision B exceeds 1000 V
● IEC61000-4-2 contact discharge exceeds 6000 V for switch ports
● CMOS low-power consumption
● Latch-up performance exceeds 100 mA per JESD 78B Class II Level A
● 1.8 V control logic at VCC = 3.6 V
● Control input accepts voltages above supply voltage
● Very low supply current, even when input is below VCC
● High current handling capability (350 mA continuous current under 3.3 V supply)
● Specified from – 40 °C to +85 °C and from – 40 °C to +125 °C
●## Target Applications
● Cell phone
● PDA
● Portable media player
●## Features
