TYPE | DESCRIPTION |
---|
Mounting Style | Through Hole |
Number of Pins | 8 Pin |
Supply Voltage (DC) | 15.0 V |
Case/Package | DIP-8 |
Supply Current | 25 µA |
Number of Circuits | 2 Circuit |
Number of Channels | 2 Channel |
Number of Positions | 8 Position |
Common Mode Rejection Ratio | 80 dB |
Bandwidth | 20 kHz |
Slew Rate | 12.0 mV/μs |
Gain Bandwidth Product | 20 kHz |
Input Impedance | 20.0 GΩ |
Input Offset Voltage | 125 µV |
Input Bias Current | 4 nA |
Operating Temperature (Max) | 85 ℃ |
Operating Temperature (Min) | -40 ℃ |
Gain Bandwidth | 20 kHz |
Supply Voltage | 1.6V ~ 36V |
Supply Voltage (Max) | 36 V |
Supply Voltage (Min) | 1.6 V |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Each |
Size-Length | 9.27 mm |
Size-Width | 7.24 mm |
Size-Height | 3.43 mm |
Operating Temperature | -40℃ ~ 85℃ |
The OP290GPZ is a high-performance micropower dual Operational Amplifier operates from a single supply of +1.6 to +36V. Input voltage range includes the negative rail allowing the OP290 to accommodate input signals down to ground in single supply operation. The OP290"s output swing also includes ground when operating from a single supply, enabling zero-in and zero-out operation. The OP290 draws less than 20µA of quiescent supply current per amplifier, while able to deliver over 5mA of output current to a load. Input offset voltage is below 200µV eliminating the need for external nulling. Gain exceeds 700000 and common-mode rejection is better than 100dB. The power supply rejection ratio supply rejection ratio of under 5.6µV/V minimizes offset voltage changes experienced in battery powered systems. The low offset voltage and high gain offered by the OP290 bring precision performance to micropower applications.
● Input/output ranges include ground
● 20µA/amplifier Maximum low supply current
● 5mA Minimum high output drive
● 200µV Typical low input offset voltage
● 400V/mV Minimum high open-loop gain
ADI
Low Voltage Dual Precision, Micropower Op Amp
TT Electronics/Optek Technology
Plastic Infrared Emitting Diode
ADI
ANALOG DEVICES OP290GPZ Operational Amplifier, Dual, 2 Amplifier, 20kHz, 0.012V/µs, 1.6V to 36V, DIP, 8Pins
TT Electronics/Optek Technology
OPTEK TECHNOLOGY OP290A Infrared Emitter, 50°, T-1 3/4 (5mm), 1.5A, 4V, 500ns, 250ns
ADI
OP Amp Dual GP ±18V/36V 8Pin PDIP
TT Electronics/Optek Technology
OP290 Series 4V 150mA Through Hole Plastic Infrared Emitting Diode - T 1 3/4
TT Electronics/Optek Technology
LED IrLED 890nm 2Pin T-1 3/4
ADI
IC DUAL OP-AMP, 750uV OFFSET-MAX, 0.02MHz BAND WIDTH, PDSO16, PLASTIC, SOL-16, Operational Amplifier
ADI
18V; precision, low power, micropower dual operational amplifier
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.