PCF8577CT/3,118 Datasheet PDF - NXP

Overview

●The PCF8577C is an LCD driver which drives up to 32 segments directly, or 64 segments in a duplex configuration.

●The two-line I²C-bus interface substantially reduces wiring overheads in remote display applications. I²C-bus traffic is minimized in multiple IC applications by automatic address incrementing, hardware subaddressing and display memory switching (direct drive mode).To allow partial VDD shutdown, the ESD protection system of the SCL and SDA pins does not use a diode connected to VDD.

●MoreLess

●## Features

● Direct/duplex drive modes with up to 32/64 LCD-segment drive capability per device

● Operating supply voltage: 2.5 V to 6 V

● Low power consumption

● I²C-bus interface

● Optimized pinning for single plane wiring

● Single-pin built-in oscillator

● Auto-incremented loading across device subaddress boundaries

● Display memory switching in direct drive mode

● May be used as I²C-bus output expander

● System expansion up to 256 segments

● Power-on reset blanks display

● I²C-bus address: 0111 0100

●## Features