The RHF1201 is a 12-bit, 50 Msps sampling frequency analog-to-digital converter that uses pure (ELDRS-free) CMOS 0.25 μm technology combining high performance, radiation robustness, and very low power consumption. The device is based on a pipeline structure and digital error correction to provide excellent static linearity. Specifically designed to optimize the speed power consumption ratio, the RHF1201 integrates a proprietary track-and-hold structure making it ideal for IF-sampling applications up to 150 MHz. A voltage reference network is integrated in the circuit to simplify the design and minimize external components. A tri-state capability is available on the outputs to allow common bus sharing. Output data can be coded in two different formats. A Data Ready signal, raised when the data is valid on the output, can be used for synchronization purposes.
●Key Features
● Qml-V qualified, smd 5962-05217
● Rad-hard: 300 kRad(Si) TID
● Failure immune (SEFI) and latchup immune (SEL) up to 120 MeV-cm2 /mg at 2.7 V and 125 °C
● Hermetic package
● Wide sampling range
● Tested at 50 Msps
● OptimwattTM adaptive power: 44 mW at 0.5 Msps and 100 mW at 50 Msps
● Optimized for 2 Vpp differential input
● SFDR up to 75 dB at FS = 50 Msps, Fin = 15 MHz
● 2.5 V/3.3 V compatible digital I/O
● Built-in reference voltage with external bias capability
