SM320F28335-EP Datasheet PDF - TI

The SM320F28335 is a highly integrated, high-performance solution for demanding control applications.

●Throughout this document, the device is abbreviated as F28335. provides a summary of features.

● High-Performance Static CMOS Technology

● Up to 150 MHz (6.67-ns Cycle Time)

● 1.9-V/1.8-V Core, 3.3-V I/O Design

● High-Performance 32-Bit CPU

● IEEE-754 Single-Precision Floating-Point Unit (FPU)

● 16 x 16 and 32 x 32 MAC Operations

● 16 x 16 Dual MAC

● Harvard Bus Architecture

● Fast Interrupt Response and Processing

● Unified Memory Programming Model

● Code-Efficient (in C/C++ and Assembly)

● Six Channel DMA Controller (for ADC, McBSP, ePWM, XINTF, and SARAM)

● 16-bit or 32-bit External Interface (XINTF)

● Over 2M x 16 Address Reach

● On-Chip Memory

● 256K x 16 Flash, 34K x 16 SARAM

● 1K x 16 OTP ROM

● Boot ROM (8K x 16)

● With Software Boot Modes (via SCI, SPI, CAN, I2C, McBSP, XINTF, and Parallel I/O)

● Standard Math Tables

● Clock and System Control

● Dynamic PLL Ratio Changes Supported

● On-Chip Oscillator

● Watchdog Timer Module

● GPIO0 to GPIO63 Pins Can Be Connected to One of the Eight External Core Interrupts

● Peripheral Interrupt Expansion (PIE) Block That Supports All 58 Peripheral Interrupts

● 128-Bit Security Key/Lock

● Protects Flash/OTP/RAM Blocks

● Prevents Firmware Reverse Engineering

● Enhanced Control Peripherals

● Up to 18 PWM Outputs

● Up to 6 HRPWM Outputs With 150 ps MEP Resolution

● Up to 6 Event Capture Inputs

● Up to 2 Quadrature Encoder Interfaces

● Up to 8 32-bit/Nine 16-bit Timers

● Three 32-Bit CPU Timers

● Serial Port Peripherals

● Up to 2 CAN Modules

● Up to 3 SCI (UART) Modules

● Up to 2 McBSP Modules (Configurable as SPI)

● One SPI Module

● One Inter-Integrated-Circuit (I2C) Bus

● 12-Bit ADC, 16 Channels

● 80-ns Conversion Rate

● 2 x 8 Channel Input Multiplexer

● Two Sample-and-Hold

● Single/Simultaneous Conversions

● Internal or External Reference

● Up to 88 Individually Programmable, Multiplexed GPIO Pins With Input Filtering

● JTAG Boundary Scan Support(1)

● Advanced Emulation Features

● Analysis and Breakpoint Functions

● Real-Time Debug via Hardware

● Development Support Includes

● ANSI C/C++ Compiler/Assembler/Linker

● Code Composer Studio IDE

● DSP/BIOS

● Digital Motor Control and Digital Power Software Libraries

● Low-Power Modes and Power Savings

● IDLE, STANDBY, HALT Modes Supported

● Disable Individual Peripheral Clocks

● Package Options

● Quad Flatpack With Power-Pad (PTP)

● Thin Quad Flatpack (PGF, Preview Only)

● MicroStar BGA (GHH)

● Plastic BGA (GJZ)

● Temperature Options:

● A: –40°C to 85°C (GHH) (PGF, GJZ, Preview Only)

● S: –40°C to 125°C (GJZ, Preview Only)

● Q: –40°C to 125°C (GJZ, Preview Only)

● M: –55°C to 125°C (PTP, GJZ)

● APPLICATIONS

● Controlled Baseline

● One Assembly/Test Site

● One Fabrication Site

● Available in Military (–55°C/125°C) Temperature Range

● Extended Product Life Cycle

● Extended Product-Change Notification

● Product Traceability

● SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS

● Controlled Baseline

● One Assembly/Test Site

● One Fabrication Site

● Available in Military (–55°C/125°C) Temperature Range(2)

● Extended Product Life Cycle

● Extended Product-Change Notification

● Product Traceability

●(1) IEEE Standard 1149.1-1990 Standard Test Access Port and Boundary Scan Architecture

●(2) Additional temperature ranges are available - contact factory