TYPE | DESCRIPTION |
---|
Mounting Style | Surface Mount |
Number of Pins | 16 Pin |
Supply Voltage (DC) | 5.00V (max) |
Case/Package | SOIC-16 |
Supply Current | 4 mA |
Number of Circuits | 4 Circuit |
Number of Channels | 4 Channel |
Number of Positions | 16 Position |
Bandwidth | 8 kHz |
Slew Rate | 4.00 V/μs |
Input Offset Voltage | 2.5 mV |
Input Bias Current | 500 nA |
Operating Temperature (Max) | 85 ℃ |
Operating Temperature (Min) | -40 ℃ |
Supply Voltage | 5V ~ 13.2V |
Supply Voltage (Max) | 17 V |
Supply Voltage (Min) | 0.3 V |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Tube |
Size-Length | 10 mm |
Size-Width | 4 mm |
Size-Height | 1.5 mm |
Operating Temperature | -40℃ ~ 85℃ |
The SMP04ESZ is a monolithic quad Sample-and-Hold Amplifier for use with event analysis. It has four internal precision buffer amplifiers and internal hold capacitors. It is manufactured in ADI"s advanced oxide isolated CMOS technology to obtain high accuracy, low droop rate and fast acquisition time required by data acquisition and signal processing systems. The device can acquire a 8-bit input signal to ±1/2 LSB in less than seven microseconds. The SMP04 can operate from single or dual power supplies with TTL/CMOS logic compatibility. Its output swing includes the negative supply. The SMP04 is ideally suited for a wide variety of sample-and- hold applications including amplifier offset or VCA gain adjustments. One or more can be used with a single or multiple DACs to provide multiple set points within a system. The SMP04 offers significant cost and size reduction over lent module or discrete designs.
● Four independent sample-and-holds
● Internal hold capacitor
● Output buffers stable for CL
● Single or dual supply applications
● Monolithic low power CMOS design
● 12-bit High accuracy
● 2mV/s Typical very low droop rate
ADI
CMOS Quad Sample-and-Hold Amplifier
ADI
ANALOG DEVICES SMP04ESZ Sample and Hold Amplifier, CMOS Quad, 4 Amplifier, 85kHz, 9µs, 2.5mV, SOIC, 16Pins
ADI
ANALOG DEVICES SMP04EPZ Sample and Hold Amplifier, CMOS Quad, 4 Amplifier, 85kHz, 9µs, 2.5mV, DIP, 16Pins
ADI
Sample and Hold 4CH 11us 16Pin SOIC N Tube
JST
Connector Housing, SM Series, Plug, 4Positions, 2.5mm, SHF-001T-0.8BS Socket Contacts
JST
Plug; wire-wire; female; SM; 2.5mm; PIN:4; w/o contacts; for cable
ADI
Sample and Hold 4CH 11us 16Pin SOIC N T/R
ADI
Sample and Hold 4CH 11us 16Pin CDIP Tube
ADI
Sample and Hold 4CH 11us 16Pin PDIP Tube
ADI
Sample and Hold 4CH 11us 16Pin SOIC N T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.