| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 16 Pin |
| Case/Package | PDIP-16 |
| Supply Current | 6 mA |
| Number of Circuits | 8 Circuit |
| Number of Channels | 8 Channel |
| Number of Positions | 16 Position |
| Slew Rate | 3.00 V/μs |
| Input Offset Voltage | 2.5 mV |
| Input Bias Current | 500 nA |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 7V ~ 15V |
| Supply Voltage (Max) | 17 V |
| Supply Voltage (Min) | 0.3 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 20.07 mm |
| Size-Width | 6.35 mm |
| Size-Height | 3.3 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The SMP08FPZ is a low droop rate octal Sample-and-Hold Amplifier with multiplexed input. It has eight internal buffer amplifiers, input multiplexer and internal hold capacitors. It is manufactured in an advanced oxide isolated CMOS technology to obtain high accuracy, low droop rate and fast acquisition time. The SMP08 has a typical linearity error of only 0.01% and can accurately acquire a 10-bit input signal to ±1/2 LSB in less than 7 microseconds. The SMP08"s output swing includes the negative supply in both single and dual supply operation. The SMP08 was specifically designed for systems that use a calibration cycle to adjust a multiple of system parameters. The low cost and high level of integration make the SMP08 ideal for calibration requirements that have previously required an ASIC or high cost multiple D/A converters. The SMP08 is also ideally suited for a wide variety of sample-and-hold applications including amplifier offset or VCA gain adjustments.
● Internal hold capacitors
● Low droop rate
● Break-before-make channel addressing
●ESD sensitive device, electrostatic charges as high as 4000V readily accumulate on the human body and test equipment and can discharge without detection.
ADI
Octal Sample-and-Hold with Multiplexed Input
ADI
Sample and Hold 8CH 7us 16Pin SOIC N Tube
ADI
ANALOG DEVICES SMP08FPZ Sample and Hold Amplifier, 8 Amplifier, 3.6µs, 2.5mV, DIP, 16Pins
JST
SM Series 8Position 2.5mm Pitch Wire to Wire Black Connector Housing
ADI
Sample and Hold 8CH 7us 16Pin SOIC N T/R
ADI
IC 8Channel, SAMPLE AND HOLD AMPLIFIER, 3.6us ACQUISITION TIME, PDIP16, PLASTIC, DIP-16, Sample and Hold Circuit
ADI
Sample and Hold 8CH 7us 16Pin SOIC N
ADI
Sample and Hold 8CH 7us 16Pin SOIC N T/R
ADI
IC 8Channel, SAMPLE AND HOLD AMPLIFIER, 7us ACQUISITION TIME, PDIP16, PLASTIC, DIP-16, Sample and Hold Circuit
ADI
IC 8Channel, SAMPLE AND HOLD AMPLIFIER, 3.6us ACQUISITION TIME, CDIP16, HERMETIC SEALED, CERDIP-16, Sample and Hold Circuit
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
