TYPE | DESCRIPTION |
---|
Mounting Style | Through Hole |
Number of Pins | 8 Pin |
Supply Voltage (DC) | 5.50V (max) |
Case/Package | DIP-8 |
Supply Current | 2 mA |
Number of Positions | 8 Position |
Data Rate | 10.0 Mbps |
Drivers Per Package | 1 |
Operating Temperature (Max) | 85 ℃ |
Operating Temperature (Min) | -40 ℃ |
Supply Voltage | 4.5V ~ 5.5V |
Supply Voltage (Max) | 5.5 V |
Supply Voltage (Min) | 4.5 V |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Tube |
Operating Temperature | -40℃ ~ 85℃ |
The SN65HVD485EP is a Half-duplex Transceiver designed for RS-485 data bus networks. Powered by a 5V supply, it is fully compliant with the TIA/EIA-485A standard. This device is suitable for data transmission up to 10Mbps over long twisted-pair cables and is designed to operate with very low supply current, typically less than 2mA, exclusive of the load. When the device is in the inactive shutdown mode, the supply current drops below 1mA. The wide common-mode range and high ESD protection levels of this device make it suitable for demanding applications such as electrical inverters, status/command signals across telecom racks, cabled chassis interconnects and industrial automation networks where noise tolerance is essential. The SN65HVD485E device matches the industry-standard footprint of the SN75176 device. power-ON reset circuits keep the outputs in a high-impedance state until the supply voltage has stabilized.
● Bus-pin ESD protection up to 15kV
● 1/2 Unit-load (up to 64 nodes on the bus)
● Bus-open-failsafe receiver
● Glitch-free power-up and power-down bus inputs and outputs
● Industry-standard SN75176 footprint
TI
RS-485 Half-Duplex RS-485 Transceiver Single Transmitter/Receiver RS-485 8Pin SOIC T/R
TI
TEXAS INSTRUMENTS SN65HVD485ED RS485 Transceiver IC, 1 Driver, 10Mbps, 4.5V to 5.5V, SOIC-8
TI
TEXAS INSTRUMENTS SN65HVD485EDGKR RS485 Transceiver IC, Half Duplex, 1 Driver, up to 10Mbps, ESD Protection, 4.5V to 5.5V, VSSOP-8
TI
RS-485 Half-Duplex RS-485 Transceiver Single Transmitter/Receiver RS-485 8Pin VSSOP Tube
TI
TEXAS INSTRUMENTS SN65HVD485EP Transceiver, RS485, 1 Driver, 4.5V to 5.5V, DIP-8
TI
Single Transmitter/Receiver RS-485 8Pin SOIC T/R
TI
Single Transmitter/Receiver RS-485 8Pin SOIC Tube
TI
Single Transmitter/Receiver RS-485 8Pin VSSOP Tube
TI
* Bus-Pin ESD Protection Up to 15kV * 1/2 Unit Load-Up to 64 Nodes on a Bus * Bus-Open-Failsafe Receiver * Glitch-Free Power-Up/Down Bus Inputs and Outputs * Available in Small MSOP-8 Package * Meets or Exceeds the Requirements of the TIA/EIA-485A Standard * Industry-Standard SN75176 Footprint * APPLICATIONS * Motor Control * Power Inverters * Industrial Automation * Building Automation Networks * Industrial Process Control * Battery-Powered Applications * Telecommunications Equipment
TI
Single Transmitter/Receiver RS-485 8Pin PDIP Tube
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.