| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 14 Pin |
| Supply Voltage (DC) | 4.50V ~ 5.50V |
| Case/Package | VQFN-14 |
| Number of Outputs | 4 Output |
| Number of Circuits | 4 Circuit |
| Number of Channels | 4 Channel |
| Number of Bits | 4 Bit |
| Propagation Delay Max (tpd) | 6.30 ns |
| Voltage Nodes | 5.00 V |
| Quiescent Current | 24 mA |
| Output Current Drive | -500 µA |
| Number of Inputs | 4 Input |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 4.5V ~ 5.5V |
| Supply Voltage (Max) | 5.5 V |
| Supply Voltage (Min) | 4.5 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Size-Width | 3.5 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The ABT126 bus buffer gates feature independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE) input is low.
●When VCC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
TI
Quadruple Bus Buffer Gates With 3-State Outputs
TI
Buffer/Line Driver 4CH Non-Inverting 3-ST BiCMOS 14Pin SOIC T/R
TI
Buffer/Line Driver 4CH Non-Inverting 3-ST BiCMOS 14Pin SSOP T/R
TI
Buffer/Line Driver 4CH Non-Inverting 3-ST BiCMOS 14Pin TSSOP T/R
TI
TEXAS INSTRUMENTS SN74ABT126D Transceiver, 74ABT126, 4.5V to 5.5V, SOIC-14
TI
Buffer/Line Driver 4CH Non-Inverting 3-ST BiCMOS 14Pin TSSOP Tube
TI
Transceiver, 74ABT126, 4.5V to 5.5V, QFN-14
TI
Buffer/Line Driver 4CH Non-Inverting 3-ST BiCMOS 14Pin PDIP Tube
TI
Buffer/Line Driver 4CH Non-Inverting 3-ST BiCMOS 14Pin SOP T/R
TI
Buffer/Line Driver 4CH Non-Inverting 3-ST BiCMOS 14Pin SSOP
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
