The "ABT16245A devices are 16-bit noninverting 3-state transceivers designed for synchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements.
●These devices can be used as two 8-bit transceviers or one 16-bit transceiver. They allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated.
●When VCC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impendance state above 2.1 V, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
●The SN54ABT16245A is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT16245A is characterized for operation from -40°C to 85°C.
● Members of the Texas Instruments Widebus Family
● State-of-the-Art EPIC-IIB BiCMOS Design Significantly Reduces Power Dissipation
● Typical VOLP (Output Ground Bounce) < 1 V at VCC = 5 V, TA = 25°C
● High-Impedance State During Power Up and Power Down
● Distributed VCC and GND Pin Configuration Minimizes High-Speed Switching Noise
● Flow-Through Architecture Optimizes PCB Layout
● High-Drive Outputs (-32-mA IOH, 64-mA IOL)
● Latch-Up Performance Exceeds 500 mA Per JESD 70
● ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
● Package Options Includes Plastic Thin Very Small-Outline (DGV), Shrink Small-Outline (DL), and Thin Shrink Small-Outline (DGG) Packages and 380-mil Fine-Pitch Ceramic (WD) Flat Package Using 25-mil Center-to-Center Spacings
●Widebus, EPIC-IIB are trademarks of Texas Instruments.
