| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Frequency | 170 MHz |
| Number of Pins | 14 Pin |
| Supply Voltage (DC) | 2.00V ~ 5.50V |
| Case/Package | TSSOP-14 |
| Number of Outputs | 1 Output |
| Output Current | 8 mA |
| Number of Circuits | 2 Circuit |
| Number of Positions | 14 Position |
| Clock Speed | 115 MHz |
| Number of Bits | 2 Bit |
| Propagation Delay Max (tpd) | 11.0 ns |
| Voltage Nodes | 5.00 V, 3.30 V |
| Input Capacitance | 2 pF |
| Output Current Drive | -1.00 mA |
| Number of Inputs | 1 Input |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 2V ~ 5.5V |
| Supply Voltage (Max) | 5.5 V |
| Supply Voltage (Min) | 2 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Each |
| Operating Temperature | -40℃ ~ 125℃ (TA) |
The SN74AHC74Q dual positive-edge-triggered device is a D-type flip-flop.
●A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements is transferred to the outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs.
TI
TEXAS INSTRUMENTS SN74AHC74QPWRG4Q1 Flip-Flop, Open Drain, Positive Edge, 74AHC74, D, 11ns, 170MHz, 8mA, TSSOP
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
