| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 5 Pin |
| Supply Voltage (DC) | 2.70 V, 2.70 V (max) |
| Case/Package | SC-70-5 |
| Number of Outputs | 1 Output |
| Supply Current | 250 mA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Number of Positions | 5 Position |
| Number of Bits | 1 Bit |
| Propagation Delay Max (tpd) | 2.50 ns |
| Voltage Nodes | 2.50 V |
| Number of Gates | 1 Gate |
| Number of Inputs | 1 Input |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 0.8V ~ 2.7V |
| Supply Voltage (Max) | 2.7 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Size-Length | 2 mm |
| Size-Width | 1.25 mm |
| Size-Height | 1 mm |
| Operating Temperature | -40℃ ~ 85℃ |
Amplify analog and digital signals by driving the input to the transmission line with this SN74AUC1G125DCKR buffer and line driver from Texas Instruments. With a 3-state output, this is power management at its best. This line driver has an operating temperature range of -40 °C to 85 °C. This component will be shipped in tape and reel packaging to allow for effective mounting and safe delivery. It has 1 channels per chip. This non-inverting device has a typical operating supply voltage of 1.8|2.5 V. Its minimum operating supply voltage of 0.8 V, while its maximum is 2.7 V.
TI
Single Bus Buffer Gate With 3-State Output
TI
Buffer/Line Driver 1CH Non-Inverting 3-ST CMOS 5Pin SC-70 T/R
TI
Buffer/Line Driver 1CH Non-Inverting 3-ST CMOS 5Pin SOT-23 T/R
TI
Buffer/Line Driver 1CH Non-Inverting 3-ST CMOS 5Pin DSBGA T/R
TI
Buffer/Line Driver 1CH Non-Inverting 3-ST CMOS 5Pin DSBGA T/R
TI
Buffer/Line Driver 1CH Non-Inverting 3-ST CMOS 5Pin DSBGA T/R
TI
Buffer/Line Driver 1CH Non-Inverting 3-ST CMOS 5Pin DSBGA T/R
TI
IC BUS BUFF TRI-ST N-INV 5DSBGA
TI
Sn74auc1g125-ep Single Bus Buffer Gate
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
