| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Frequency | 110 MHz |
| Number of Pins | 16 Pin |
| Supply Voltage (DC) | 4.75V ~ 5.25V |
| Case/Package | SOIC-16 |
| Output Current | 20.0 mA |
| Number of Circuits | 4 Circuit |
| Number of Channels | 4 Channel |
| Clock Speed | 110 MHz |
| Number of Bits | 4 Bit |
| Propagation Delay Max (tpd) | 17.0 ns |
| Voltage Nodes | 5.00 V |
| Output Current Drive | -50.0 µA |
| Operating Temperature (Max) | 70 ℃ |
| Operating Temperature (Min) | 0 ℃ |
| Supply Voltage | 4.75V ~ 5.25V |
| Supply Voltage (Max) | 5.25 V |
| Supply Voltage (Min) | 4.75 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 9.9 mm |
| Size-Width | 3.91 mm |
| Size-Height | 1.58 mm |
| Operating Temperature | 0℃ ~ 70℃ |
The SN74S175D flip flop device from Texas Instruments is designed specifically to save basic state information within your circuit. It has a differential output signal. This flip flop has an operating temperature range of 0 °C to 70 °C. This device comes in tube packaging. It has 4 channels per chip. This inverting/non-inverting device has a typical operating supply voltage of 5 V. Its minimum operating supply voltage of 4.75 V, while its maximum is 5.25 V.
TI
Quadruple D-Type Flip-Flops With Clear
TI
TEXAS INSTRUMENTS SN74S175N Flip-Flop, Complementary, Differential, Positive Edge, 74S175, D, 8ns, 110MHz, 20mA, DIP
TI
Flip Flop D-Type Bus Interface Pos-Edge 1Element 16Pin PDIP Tube
TI
Flip Flop D-Type Bus Interface Pos-Edge 1Element 16Pin SOIC Tube
TI
Flip Flop D-Type Bus Interface Pos-Edge 1Element 16Pin SOP T/R
TI
Flip Flop D-Type Bus Interface Pos-Edge 1Element 16Pin PDIP
TI
Flip Flop D-Type Bus Interface Pos-Edge 1Element 16Pin SOP T/R
TI
Flip Flop D-Type Bus Interface Pos-Edge 1Element 16Pin SOP T/R
TI
IC D-TYPE POS TRG SNGL 16SOIC
TI
IC D-TYPE POS TRG SNGL 16SOIC
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
