| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 3 Pin |
| Supply Voltage (DC) | 12.0 V |
| Current Rating | 30.0 mA |
| Case/Package | SIP-3 |
| Output Voltage | 4 V |
| Output Current | 1 mA |
| Supply Current | 30 mA |
| Number of Positions | 3 Position |
| Output Current (Max) | 1 mA |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 6.6V ~ 12.6V |
| Supply Voltage (Max) | 12.6 V |
| Supply Voltage (Min) | 6.6 V |
| Input Voltage | 6.6.12.6 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Bulk |
| Size-Length | 7.6 mm |
| Size-Width | 15.2 mm |
| Lead Length | 6.86 mm |
| Operating Temperature | -40℃ ~ 125℃ |
The SS94A1 is a hall-effect Sensor IC, provides increased temperature stability and performance. Laser trimmed thick film resistors on the ceramic substrate and thin film resistors on the integrated circuit reduce null and gain shifts over temperature which results in consistent sensitivity from one device to the next. The output is clamped at the high end. Clamping voltage may be as low as 9VDC. The output will not exceed the clamping voltage regardless of field strength or power supply.
● Single current sinking or current sourcing linear output
● Improved temperature stability
● Standard mounting centres
● Laser trimmed thin film and thick film resistor minimize sensitivity and compensate
Honeywell
3 Pages / 0.09 MByte
Honeywell
16 Pages / 0.35 MByte
Honeywell
1 Pages / 0.05 MByte
Honeywell
8 Pages / 0.75 MByte
Honeywell
1 Pages / 0.21 MByte
Honeywell
Honeywell Hall-effect Linear Sensor ICs: SS490 Series, Cost-reduced miniature ratiometric linear Hall-effect sensor IC, 3.125mV/G at 5V, Flat TO92 package, Formed leads 14,99mm [0.59in] long, Available in 5000 units tape in box (ammopack) version packaging
Honeywell
HONEYWELL SS94A2 Hall Effect Sensor, Linear, 1mA, SIP, 3Pins, 6.6VDC, 12.6VDC
Honeywell
Honeywell Hall-effect Linear Sensor ICs: SS490 Series, Cost-reduced miniature ratiometric linear Hall-effect sensor IC, 3.125mV/G at 5V, Flat TO92 package, Straight leads 14,99mm [0.59in] long, Available in 5000 units tape in box (ammopack) version packaging
Honeywell
Hall Effect Sensor, -250mT Min, 250mT Max, 4V, Hybrid, Plastic/epoxy, Rectangular, 3Pin, Through Hole Mount
Honeywell
Hall Effect Sensor 1mA 5V/9V 3Pin
Honeywell
Hall Effect Sensor 1mA 8V 3Pin
Honeywell
Hall Effect Sensor 2mA 5V/9V 3Pin
Honeywell
Board Mount Hall Effect / Magnetic Sensors COMMERCIAL SOLID STATE/MAGNET
Honeywell
Board Mount Hall Effect / Magnetic Sensors Magnetic Sensors
Honeywell
Board Mount Hall Effect / Magnetic Sensors 4.5V to 8V 17.5mA Ceramic SIP
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
