General Description
●SSD1332 is a single-chip CMOS OLED/PLED driver with controller for organic/polymer light
●emitting diode dot-matrix graphic display system. SSD1332 consists of 288 segments (96RGB) and 64 commons. This IC is designed for Common Cathode type OLED panel.
●SSD1332 displays data directly from its internal 96x64x16 bits Graphic Data RAM (GDDRAM).
●Data/Commands are sent from general MCU through the hardware selectable 6800/8000 series
●compatible Parallel Interface or Serial Peripheral Interface. SSD1332 has a 256 steps contrast control and 65K color control.
●FEATURES
● Support max. 96RGB x 64 matrix panel
● Power supply: VDD=2.4V - 3.5V
● VCC=8.0V - 18.0V
● OLED driving output voltage, 16V maximum
● DC-DC voltage converter
● Segment maximum source current: 200uA
● Common maximum sink current: 50mA
● Embedded 96x64x16 bit SRAM display buffer
● 16 step master current control, and 256 step current control for the three color components
● Programmable Frame Rate
● Graphic Acceleration Command Set (GAC)
● 8-bit 6800-series Parallel Interface, 8-bit 8080-series Parallel Interface, Serial Peripheral
●Interface.
● Wide range of operating temperature: -30 to 85 °C
