Introduction
●The ST10F273E device is a derivative of the STMicroelectronics ST10 family of 16-bit single-chip CMOS microcontrollers.
●The ST10F273E combines high CPU performance (up to 32 million instructions per second) with high peripheral functionality and enhanced I/O-capabilities. It also provides on-chip high-speed single voltage Flash memory, on-chip high-speed RAM, and clock generation via PLL.
●ST10F273E is processed in 0.18mm CMOS technology. The MCU core and the logic is supplied with a 5 V to 1.8 V on-chip voltage regulator. The part is supplied with a single 5 V supply and I/Os work at 5 V.
●Feature summary
●■ High performance 16-bit CPU with DSP functions
●– 31.25ns instruction cycle time at 64 MHz max CPU clock
●– Multiply/accumulate unit (MAC) 16 x 16-bit multiplication, 40-bit accumulator
●– Enhanced boolean bit manipulations
●– Single-cycle context switching support
●■ Memory organization
●– 512 Kbyte on-chip Flash memory single voltage with erase/program controller (full performance, 32-bit fetch)
●– 100K erasing/programming cycles.
●– Up to 16 Mbyte linear address space for code and data (5 Mbytes with CAN or I2C)
●– 2 Kbyte on-chip internal RAM (IRAM)
●– 34 Kbyte on-chip extension RAM (XRAM)
●– Programmable external bus configuration & characteristics for different address ranges
●– 5 programmable chip-select signals
●– Hold-acknowledge bus arbitration support
●■ Interrupt
●– 8-channel peripheral event controller for single cycle interrupt driven data transfer
●– 16-priority-level interrupt system with 56 sources, sampling rate down to 15.6ns
●■ Timers
●– 2 multifunctional general purpose timer units with 5 timers
●■ Two 16-channel capture / compare units
●■ 4-channel PWM unit + 4-channel XPWM
●■ A/D Converter
●– 24-channel 10-bit
●– 3µs Minimum conversion time
●■ Serial channels
●– 2 synch. / asynch. serial channels
●– 2 high-speed synchronous channels
●– I2C standard interface
●■ 2 CAN 2.0B interfaces operating on 1 or 2 CAN busses (64 or 2x32 messages, C-CAN version)
●■ Fail-safe protection
●– Programmable watchdog timer
●– Oscillator watchdog
●■ On-chip bootstrap loader
●■ Clock generation
●– On-chip PLL and 4 to 12 MHz oscillator
●– Direct or prescaled clock input
●■ Real time clock and 32 kHz on-chip oscillator
●■ Up to 111 general purpose I/O lines
●– Individually programmable as input, output or special function
●– Programmable threshold (hysteresis)
●■ Idle, power down and stand-by modes
●■ Single voltage supply: 5 V ±10%.
