The STM6600-01 devices monitor the state of connected push-button(s) as well as sufficient supply voltage. An enable output controls power for the application through the MOSFET transistor, DC-DC converter, regulator, etc. If the supply voltage is above a precise voltage threshold, the enable output can be asserted by a simple press of the button. Factory-selectable supply voltage thresholds are determined by highly accurate and temperature-compensated references. An interrupt is asserted by pressing the push-button during normal operation and can be used to request a system power-down. The interrupt is also asserted if undervoltage is detected. By a long push of one button (PB) or two buttons (PBand SR) either a reset is asserted or power for the application is disabled depending on the option used.
●The device also offers additional features such as precise 1.5 V voltage reference with very tight accuracy of 1%, separate output indicating undervoltage detection and separate output for distinguishing between interrupt by push-button or undervoltage.
●The device consumes very low current of 6 μA during normal operation and only 0.6 μA current during standby.
●The STM6600-01 is available in the TDFN12 package and is offered in several options among features such as selectable threshold, hysteresis, timeouts, output types, etc.
●Key Features
● Operating voltage 1.6 V to 5.5 V
● Low standby current of 0.6 μA
● Adjustable Smart Reset™ assertion delay time driven by external CSRD
● Power-up duration determined primarily by push-button press (STM6600) or by fixed time period, tON_BLANK (STM6601)
● Debounced PB and SR inputs
● PB and SR ESD inputs withstand voltage up to ±15 kV (air discharge) ±8 kV (contact discharge)
● Active high or active low enable output option (EN or EN) provides control of MOSFET, DC-DC converter, regulator, etc.
● Secure startup, interrupt, Smart Reset™ or power-down driven by push-button
● Precise 1.5 V voltage reference with 1% accuracy
● Industrial operating temperature –40 to +85 °C
● Available in TDFN12 2 x 3 mm package
