STM8L051F3 is member of the STM8L ultra-low-power 8-bit family.
●STM8L051F3 features an enhanced STM8 CPU core providing increased processing power (up to 16 MIPS at 16 MHz) while maintaining the advantages of a CISC architecture with improved code density, a 24-bit linear addressing space and an optimized architecture for low power operations.
●The STM8L051F3 MCU includes an integrated debug module with a hardware interface (SWIM) which allows non-intrusive In-Application debugging and ultra-fast Flash programming. It features an embedded data EEPROM and low power, low-voltage, single-supply program Flash memory.
●The device incorporates an extensive range of enhanced I/Os and peripherals, a 12-bit ADC, a real-time clock, two 16-bit timers, one 8-bit timer, as well as standard communication interfaces such as an SPI, an I2C interface, and one USART.
●The modular design of the peripheral set allows this device to have the same peripherals that can be found in different ST microcontroller families including 32-bit families. This makes any transition to a different family very easy, supported also by the use of a common set of development tools.
●STM8L051F3 as all the value line STM8L ultra-low-power products are based on the same architecture with the same memory mapping and a coherent pinout.
●Key Features
● Operating conditions
● Operating power supply: 1.8 V to 3.6 V Temperature range: -40 °C to 85 °C
● Low power features
● 5 low power modes: Wait, Low power run (5.1 µA), Low power wait (3 µA), Active-halt with RTC (1.3 µA), Halt (350 nA)
● Ultra-low leakage per I/0: 50 nA
● Fast wakeup from Halt: 5 µs
● Advanced STM8 core
● Harvard architecture and 3-stage pipeline
● Max freq: 16 MHz, 16 CISC MIPS peak
● Up to 40 external interrupt sources
● Reset and supply management
● Low power, ultra-safe BOR reset with 5 selectable thresholds
● Ultra-low power POR/PDR
● Programmable voltage detector (PVD)
● Clock management
● 32 kHz and 1 to 16 MHz crystal oscillators
● Internal 16 MHz factory-trimmed RC
● Internal 38 kHz low consumption RC
● Clock security system
● Low power RTC
● BCD calendar with alarm interrupt
● Digital calibration with +/- 0.5 ppm accuracy
● LSE security system
● Auto-wakeup from Halt w/ periodic interrupt
● Memories
● 8 Kbytes of Flash program memory and 256 bytes of data EEPROM with ECC
● Flexible write and read protection modes
● 1 Kbyte of RAM
● DMA
● 4 channels supporting ADC, SPI, I2C, USART, timers
● 1 channel for memory-to-memory
● 12-bit ADC up to 1 Msps/28 channels
● Internal reference voltage
● Timers
● Two 16-bit timers with 2 channels (used as IC, OC, PWM), quadrature encoder
● One 8-bit timer with 7-bit prescaler
● 2 watchdogs: 1 Window, 1 Independent
● Beeper timer with 1, 2 or 4 kHz frequencies
● Communication interfaces
● Synchronous serial interface (SPI)
● Fast I2C 400 kHz SMBus and PMBus
● USART
● Up to 18 I/Os, all mappable on interrupt vectors
● Development support
● Fast on-chip programming and non-intrusive debugging with SWIM
● Bootloader using USART
