The TAS5611 is a high performance analog input Class D amplifier with integrated closed loop feedback technology (known as PurePath™ HD) with the ability to drive up to 125W.(1) Stereo into 4 to 8 Speakers from a single 32.5V supply.
●PurePath™ HD technology enables traditional AB-Amplifier performance (<0.03% THD) levels while providing the power efficiency of traditional class D amplifiers.
●Unlike traditional Class D amplifiers, the distortion curve only increases once the output levels move into clipping.
●PurePath™ HD technology enables lower idle losses making the device even more efficient.
● PurePath™ HD Enabled Integrated Feedback Provides:
● Signal Bandwidth up to 80kHz for High Frequency Content From HD Sources
● Ultralow 0.03% THD at 1W into 4
● Flat THD at all Frequencies for Natural Sound
● 80dB PSRR (BTL, No Input Signal)
● >100dB (A weighted) SNR
● Click and Pop Free Startup
● Pin compatible with TAS5630, TAS5615 and TAS5613
● Multiple Configurations Possible on the Same PCB With Stuffing Options:
● Mono Parallel Bridge Tied Load (PBTL)
● Stereo Bridge Tied Load (BTL)
● 2.1 Single Ended Stereo Pair and Bridge Tied Load Subwoofer
● Total Output Power at 10%THD+N
● 250W in Mono PBTL Configuration into 2
● 125W per Channel in Stereo BTL Configuration into 4
● Total Output Power in BTL configuration at 1%THD+N
● 130W Stereo into 3
● 105W Stereo into 4
● 70W Stereo into 6
● 55W Stereo into 8
● >90% Efficient Power Stage With 60-m Output MOSFETs
● Self-Protection Design (Including Undervoltage, Overtemperature, Clipping,
●and Short-Circuit Protection) With Error Reporting
● EMI Compliant When Used With Recommended System Design
● Two Thermally Enhanced Package Options:
● PHD (64-Pin QFP)
● DKD (44-Pin PSOP3)
● APPLICATIONS
● Home Theater Systems
● AV Receivers
● DVD/Blu-ray Receivers
● Mini Combo System
● Active Speakers and Subwoofers
●(1) Achievable output power levels are dependent on the thermal configuration of the target application. A high performance thermal interface material between the package exposed heatslug and the heat sink should be used to achieve high output power levels
●PurePath, Power PAD are trademarks of Texas Instruments.
●All other trademarks are the property of their respective owners.