TYPE | DESCRIPTION |
---|
Mounting Style | Surface Mount |
Number of Pins | 8 Pin |
Case/Package | SOIC-8 |
Supply Current | 1.5 mA |
Number of Circuits | 2 Circuit |
Number of Channels | 2 Channel |
Common Mode Rejection Ratio | 70 dB |
Input Offset Drift | 10.0 µV/K |
Bandwidth | 1.00 MHz |
Slew Rate | 600 mV/μs |
Gain Bandwidth Product | 1 MHz |
Input Offset Voltage | 5 mV |
Input Bias Current | 200 pA |
Operating Temperature (Max) | 70 ℃ |
Operating Temperature (Min) | 0 ℃ |
Gain Bandwidth | 1 MHz |
Minimum CMRR Range | 70 dB |
Supply Voltage (Max) | 36 V |
Supply Voltage (Min) | 3 V |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Tape & Reel (TR) |
Size-Length | 6.2 mm |
Size-Width | 5.3 mm |
Size-Height | 1.95 mm |
Operating Temperature | 0℃ ~ 70℃ |
The TL092 JFET-input operational amplifier is similar in performance to the MC3403 family, but with much higher input impedance derived from a FET input stage. The N-channel-JFET input stage allows a common-mode input voltage range that includes the negative supply voltage and offers a typical input impedance of 1012 , a typical input offset current of 50 pA, and a typical input bias current of 200 pA. This device is designed to operate from a single supply over a range of 3 V to 36 V. Operation from split supplies also is possible, provided the difference between the two supplies is 3 V to 36 V. Output voltage range is from VCC to VCC+ 1.3 V, with a load resistor to VCC.
●The TL092 is characterized for operation from 0°C to 70°C.
TI
JFET INPUT OPERATIONAL AMPLIFIERS
TI
Op Amp Dual GP ±18V/36V 8Pin SOP T/R
TI
Op Amp Dual GP ±18V/36V 8Pin SOP T/R
TI
Op Amp Dual GP ±18V/36V 8Pin SOP T/R
TI
Op Amp Dual GP ±18V/36V 8Pin SOP Tube
TI
Op Amp Dual GP ±18V 8Pin PDIP Tube
TI
DAL JFET-INPT OPERATIONAL AMPLIFIER
TI
JFET INPUT OPERATIONAL AMPLIFIERS
TI
JFET INPUT OPERATIONAL AMPLIFIERS
TI
JFET INPUT OPERATIONAL AMPLIFIERS
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.