The TL4242-Q1 is an integrated adjustable constant-current source, driving loads up to 500 mA. One can adjust the output current level through an external resistor. The device design is for supplying high-power LEDs (for example, OSRAM Dragon LA W57B) under the severe conditions of automotive applications, resulting in constant brightness and extended LED lifetime. The device comes in the DRJ (QFN) package. Protection circuits prevent damage to the device in case of overload, short-circuit, reverse polarity, and overheat. The device provides the connected LEDs protection against reverse polarity as well as excess voltages up to 45 V.
●The integrated PWM input of the TL4242-Q1 permits LED brightness regulation by pulse-width modulation (PWM). The high-input impedance of the PWM input allows operating the LED driver as a protected high-side switch.
● Qualified for Automotive Applications
● AEC-Q100 Test Guidance With the Following Results:
● Device Temperature Grade 2: –40°C to 105°C
●Ambient Operating Temperature Range for QFN package
● Device Temperature Grade 1: –40°C to 125°C
●Ambient Operating Temperature Range for SFM package
● Device HBM ESD Classification Level H1C
● Device CDM ESD Classification Level C3B
● Adjustable Constant Current up to 500 mA (±5%)
● Wide Input-Voltage Range up to 42 V
● Low Dropout Voltage
● Open-Load Detection
● Overtemperature Protection
● Short-Circuit Proof
● Reverse-Polarity Proof
● APPLICATIONS
● Automotive LED Lighting Applications Including:
● Rear Light
● Daytime Running Light
● Fog Light
● Position Light
● Interior Light
● Stop or Tail Light
●All other trademarks are the property of their respective owners
