| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 20 Pin |
| Case/Package | PDIP-20 |
| Output Voltage | 4.5V ~ 13.2V |
| Output Current | 500 mA |
| Supply Current | 13000 mA |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 4.5V ~ 13.2V |
| Input Voltage | 4.5V ~ 13V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Operating Temperature | -40℃ ~ 85℃ |
The TLC59213 and TLC59213A are 8-bit source drivers with input latch with CLK input and CLR to set the output OFF. The TLC59213 and TLC59213A have large output source currents up to 500 mA with Darlington transistor and collectors tied to VCC. These feature make the device optimum level of driving the matrix of ink jet printer head, LEDs, and the scan-side of resistors matrix. The TLC59213 and TLC59213A differ only in the Data Hold Time Specification (th).
●The clamp diode is between output and ground for switching inductive load.
●All inputs are TTL/CMOS, which enable to any logic-level inputs such as MCU, CPU or SN74LV594 (serial to parallel) and the output enable LED matrix display. It can also be used with another device sink driver such as TLC59210, TLC59211 and TLC59212.
TI
8Channel Source Driver With Latch
TI
TEXAS INSTRUMENTS TLC59213AIPWT Led Driver, 8Outputs, 4.75V-13.2V in, 1MHz switch, 13.2V/500mA out, TSSOP-20
TI
LED Driver 5V/9V/12V 20Pin TSSOP T/R
TI
LED Driver 5V/9V/12V 20Pin PDIP Tube
TI
LED Driver 5V/9V/12V 20Pin PDIP Tube
TI
LED Driver 5V/9V/12V 20Pin TSSOP T/R
TI
8Bit Parallel In/Out Darlington Source Driver With Latch and Enhanced Hold Time 20-TSSOP -40℃ to 85℃
TI
8Bit Parallel In/Out Darlington Source Driver With Latch and Enhanced Hold Time
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
