| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 16 Pin |
| Case/Package | QFN-16 |
| Number of Outputs | 1 Output |
| Output Voltage | 0.9V ~ 5V |
| Output Current | 1 A |
| Number of Positions | 16 Position |
| Quiescent Current | 19.0 µA |
| Number of Regulated Outputs | 1 Output |
| Switching Frequency | 2.5 MHz |
| Topology | Buck |
| Input Voltage (Max) | 17 V |
| Input Voltage (Min) | 4 V |
| Output Voltage (Max) | 5 V |
| Output Voltage (Min) | 0.9 V |
| Output Current (Max) | 1 A |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Input Voltage | 17 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Size-Length | 3.15 mm |
| Size-Width | 3.15 mm |
| Size-Height | 0.95 mm |
| Operating Temperature | -40℃ ~ 85℃ (TA) |
The TLV62150RGTT is an easy-to-use synchronous step-down DC-to-DC Converter optimized for applications with high power density. A high switching frequency of typically 2.5MHz allows the use of small inductors and provides fast transient response as well as high output voltage accuracy by use of the DCS-Control™ topology. With their wide operating input voltage range of 4 to 17V, the device is ideally suited for systems powered from either a Li-ion or other batteries as well as from 12V intermediate power rails. It supports up to 1A continuous output current at output voltage between 0.9 and 5V (with 100% duty cycle mode). The output voltage startup ramp is controlled by the soft-start pin, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the enable and open-drain power good pins. In power save mode, the device draws quiescent current of about 19µA from VIN.
● DCS-Control™ topology
● Pin-selectable output voltage (nominal, +5%)
● Programmable soft-start and tracking
● Seamless power save mode transition
● Power good output
● 100% Duty cycle mode
● Short-circuit protection
● Over-temperature protection
● Green product and no Sb/Br
TI
4-17V 1A Step-Down Converter with DCS-Control
TI
Conv DC-DC 4V to 17V Step Down Single-Out 0.9V to 5V 1A 16Pin VQFN EP T/R
TI
Conv DC-DC 4V to 17V Step Down Single-Out 0.9V to 5V 1A 16Pin VQFN EP T/R
TI
Conv DC-DC 4V to 17V Step Down Single-Out 0.9V to 5V 1A 16Pin VQFN EP T/R
TI
Conv DC-DC 4V to 17V Step Down Single-Out 0.9V to 5V 1A 16Pin VQFN EP T/R
TI
TEXAS INSTRUMENTS TLV62150EVM-505 Evaluation Board, Synchronous Step Down Converter, Converts 4V to 17V Input Voltage to 3.3V, 3A
TI
4-17V, 1A STEP-DOWN CONVERTER with DCS-Control in 3x3 QFN Package 16-QFN -40℃ to 85℃
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
