INTRODUCTION
●Unless specifically noted, all references to the 80C186EB apply to the 80C188EB, 80L186EB, and
●80L188EB. References to pins that differ between the 80C186EB/80L186EB and the 80C188EB/
●80L188EB are given in parentheses. The ``L"" in the part number denotes low voltage operation. Physically and functionally, the ``C"" and ``L"" devices are identical.
●Full Static Operation
●True CMOS Inputs and Outputs
●Integrated Feature Set
● Low-Power Static CPU Core
● Two Independent UARTs each with
●an Integral Baud Rate Generator
● Two 8-Bit Multiplexed I/O Ports
● Programmable Interrupt Controller
● Three Programmable 16-Bit
●Timer/Counters
● Clock Generator
● Ten Programmable Chip Selects with
●Integral Wait-State Generator
● Memory Refresh Control Unit
● System Level Testing Support (ONCE
●Mode)
●Direct Addressing Capability to 1 Mbyte
●Memory and 64 Kbyte I/O
●Speed Versions Available (5V):
● 25 MHz (80C186EB25/80C188EB25)
● 20 MHz (80C186EB20/80C188EB20)
● 13 MHz (80C186EB13/80C188EB13)
●Available in Extended Temperature
●Range (b40§Ctoa85§C)
●Speed Versions Available (3V):
● 16 MHz (80L186EB16/80L188EB16)
● 13 MHz (80L186EB13/80L188EB13)
● 8 MHz (80L186EB8/80L188EB8)
●Low-Power Operating Modes:
● Idle Mode Freezes CPU Clocks but
●keeps Peripherals Active
● Powerdown Mode Freezes All
●Internal Clocks
●Supports 80C187 Numeric Coprocessor
●Interface (80C186EB PLCC Only)
●Available In:
● 80-Pin Quad Flat Pack (QFP)
● 84-Pin Plastic Leaded Chip Carrier(PLCC)
● 80-Pin Shrink Quad Flat Pack (SQFP)
