The TPD2E009 device provides two ESD protection diodes with flow-through pin mapping for ease of board layout. This device has been designed to protect sensitive components which are connected to ultra high-speed data and transmission lines. The TPD2E009 offers transient voltage suppression for Level 4 of IEC 61000-4-2 Contact ESD protection. TVS protection up to a 5-A (8/20 µs) peak pulse-current rating per the IEC 61000-4-5 (lightning) specification is also provided.
●The monolithic silicon technology allows matching between the differential signal pairs. The less than 0.05-pF differential capacitance ensures that the differential signal distortion due to added ESD circuit protection remains minimal. The low capacitance
●(0.7-pF) is suitable for high-speed data rates up to
●6 Gbps.
●The TPD2E009 TVS diode is offered in a DRT (1 mm × 0.8 mm) package for space-saving portable applications. The industry standard DBZ (2.92 mm × 1.3 mm) package offers additional flexibility in the board layout for the system designer.
●Typical applications for the TPD2E009 line of ESD protection products are: HDMI, USB, eSATA, and ethernet interfaces in notebooks, DVD and media players, set-top boxes, and portable computers.
● Supports Data Rates up to 6 Gbps
● IEC 61000-4-2 ESD Protection
● ±8-kV Contact Discharge
● ±8-kV Air-Gap Discharge
● IEC 61000-4-5 Surge Protection
● 5 A (8/20 µs)
● Low Capacitance
● DRT: 0.7-pF (Typ)
● DBZ: 0.9-pF (Typ)
● 0.05-pF Matching Capacitance Between the
●Differential Signal Pair
● Dual-Matching TVS Diodes to Protect the
●Differential Data and Clock Lines of HDMI, LVDS,
●SATA, Ethernet, or USB Interfaces
● Space-Saving DRT and DBZ Package Options
● Flow-Through Pin Mapping for the High-Speed
●Lines Ensures Zero Additional Skew Due to Board
●Layout While Placing the ESD-Protection Chip
●Near the Connector