The TPS6240x-Q1 family of devices are synchronous dual step-down DC-DC converters optimized for battery-powered portable applications and automotive systems. They provide two independent output voltage rails powered by rechargeable batteries or standard 3.3-V or 5-V voltage rail.
●The EasyScale™ serial interface allows output-voltages modification during operation. The fixed-output-voltage versions, TPS62402-Q1, TPS62404-Q1, and TPS62405-Q1 support one-pin-controlled simple dynamic voltage scaling for low-power processors.
●The TPS6240x-Q1 operates at 2.25-MHz fixed switching frequency and enters the power-save mode operation at light load currents to maintain high efficiency over the entire load-current range. For low-noise applications, one can force the devices into fixed-frequency PWM mode by pulling the MODE/DATA pin high. The shutdown mode reduces the current consumption to 1.2-µA, typical. The devices allow the use of small inductors and capacitors to achieve a small solution size.
● Qualified for Automotive Applications
● AEC-Q100 Qualified With the Following Results:
● Device Temperature Grade 1: –40°C to 125°C
●Operating Junction Temperature Range
● Device HBM ESD Classification Level H2
● Device CDM ESD Classification Level C4B
● High Efficiency—Up to 95%
● VIN Range From 2.5 V to 6 V
● 2.25-MHz Fixed-Frequency Operation
● Output Current 400 mA and 600 mA
● Adjustable Output Voltage From 0.6 V to VIN
● Pin Selectable Output Voltage Supports Simple
●Dynamic Voltage Scaling
● EasyScale™ Optional One-Pin Serial Interface
● Power-Save Mode at Light Load Currents
● 180° Out-of-Phase Operation
● Output-Voltage Accuracy in PWM Mode ±1%
● Typical 32-µA Quiescent Current for Both Converters
● 100% Duty Cycle for Lowest Dropout