| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 6 Pin |
| Case/Package | SOT-23-6 |
| Power Rating | 463 mW |
| Number of Outputs | 1 Output |
| Input Voltage (DC) | 5.50 V |
| Output Current | 1.8 A |
| Number of Channels | 1 Channel |
| Number of Positions | 6 Position |
| Power Dissipation | 463 mW |
| Quiescent Current | 2.00 µA |
| Output Current (Max) | 1.8 A |
| Output Current (Min) | 1.8 A |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Power Dissipation (Max) | 463 mW |
| Supply Voltage (Max) | 5.5 V |
| Supply Voltage (Min) | 1.4 V |
| Input Voltage | 5.5 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Size-Length | 3.05 mm |
| Size-Width | 1.75 mm |
| Size-Height | 1.3 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The TPS22929DDBVT is a 115mR Load Switch with quick output discharge and reverse current protection. The device contains a P-channel MOSFET that can operate over an input voltage range of 1.4 to 5.5V. The switch is controlled by an on/off input (ON), which is capable of interfacing directly with low-voltage control signals. It is active high enable. The TPS22929D contains a 150R on-chip load resistor for quick output discharge when the switch is turned off. The rise time of the device is internally controlled in order to avoid inrush current. The TPS22929D device provides circuit breaker functionality by latching off the power-switch during reverse voltage situations. An internal reverse voltage comparator disables the power-switch when the output voltage (VOUT) is driven higher than the input (VIN) to quickly (10µs typ) stop the flow of current towards the input side of the switch. Reverse current is always active, even when the power-switch is disabled.
● Integrated single load switch
● 1.4 to 5.5V Input voltage range
● Low ON-resistance
● 1.8A Continuous switch current (25°C)
● Low threshold control input
● Controlled slew-rate
● Under-voltage lockout
● Quick output discharge
● Reverse current protection
● Green product and no Sb/Br
●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
TI
5.5V 1.8A 115mOhm Load Switch with Quick Output Discharge and Reverse Current Protection 6-SOT-23 -40℃ to 85℃
TI
Texas Instruments TPS22929DDBVT Load Switch IC, Load Management, 1.8A, 1.4 → 5.5V, 463mW, 6Pin, SOT-23
TI
TPS22929D Low-Input Voltage, 1.8A Single-Channel Load Switch Evaluation Module
TI
5.5V, 1.8A, 115m Load Switch with Quick Output Discharge and Reverse Current Protection 6-SOT-23 -40℃ to 85℃
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
