| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 6 Pin |
| Case/Package | DSBGA-6 |
| Power Rating | 810.63 mW |
| Number of Outputs | 1 Output |
| Input Voltage (DC) | 5.50 V |
| Output Voltage | 0V ~ 5.5V |
| Output Current | 0.175 A |
| Supply Current | 0.0001 mA |
| Number of Positions | 6 Position |
| Drain to Source Resistance (on) (Rds) | 0.4 Ω |
| Power Dissipation | 0.81063 W |
| Quiescent Current | 1.30 µA |
| Input Voltage (Min) | 1.62 V |
| Output Current (Min) | 0.03 A |
| Number of Inputs | 1 Input |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Power Dissipation (Max) | 810.63 mW |
| Supply Voltage (Max) | 5.5 V |
| Supply Voltage (Min) | 1.62 V |
| Input Voltage | 5.5 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Cut Tape (CT) |
| Size-Length | 1.42 mm |
| Size-Width | 0.918 mm |
| Size-Height | 0.31 mm |
| Operating Temperature | -40℃ ~ 125℃ (TJ) |
The TPS22946YZPR is an ultralow power Load Switch that provides protection to systems and loads in high-current conditions. The device contains a 300mR current-limited P-channel MOSFET that can operate over an input voltage range of 1.62 to 5.5V. The switch is controlled by an on/off input (ON), which can interface directly with low-voltage control signals. The TPS22946 includes thermal shutdown protection that prevents damage to the device when a continuous over-current condition causes excessive heating by turning off the switch. When the switch current reaches the maximum limit, the TPS22946 operates in a constant-current mode to prohibit excessive currents from causing damage. The TPS22946 has an auto-restart feature which turns the switch on again after 70ms if the ON pin is still active. If the TPS22946 remains in an over-current condition for 5 seconds, the device shuts off until it is turned on again by setting the ON control signal off and then on.
● Integrated inrush current time-out (8ms)
● Shutdown Current <1µA
● Thermal shutdown
● Fault blanking
● Auto restart
● Overcurrent condition time-out (automatic disable for permanent overcurrent)
● 1.8V Compatible control input
TI
5.5V, 0.2A, 400mΩ Selectable Current Limit Load Switch
TI
5.5V, 0.2A, 400mΩ Selectable Current Limit Load Switch 6-DSBGA -40℃ to 85℃
TI
Power Management IC Development Tools TPS22946 Eval Module
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
