| TYPE | DESCRIPTION |
|---|
| Number of Outputs | 1 Output |
| Output Voltage | 1.8 V |
| Output Current | 10 A |
| Switching Frequency | 600 kHz |
| Input Voltage | 8V ~ 14V |
The TPS40192EVM-001 evaluation module (EVM) is a synchronous buck converter providing a fixed 1.8 V output at up to 10 A from a 12 V input bus. The EVM is designed to start up from a single supply; so, no additional bias voltage is required for start-up. The module uses the TPS40192 reduced pin count, mid-voltage, synchronous buck controller.
●TPS40192EVM-001 is designed to use a regulated 12 V (8 V to 14 V) bus to produce a regulated 1.8 V output at up to 10 A of load current. TPS40192EVM-001 is designed to demonstrate the TPS40192 in a typical 12 V bus to low-voltage applications while providing a number of test points to evaluate the performance of the TPS40192 in a given application. The EVM can be modified to support output voltages from 0.9 V to 3.3 V by changing a single set resistor.
TI
TPS40192 and TPS40193 are cost-optimized synchronous buck controllers that operate from 4.5V to 18V input. These co...
TI
DC-DC Controller (External Switch) 4.5V to 18V Input, Low Pin Count, Synchronous Buck Controller with Power Good DC-DC Cntrlr Single-OUT Step Down 700kHz 10Pin VSON EP T/R
TI
DC-DC Controller (External Switch) 4.5V to 18V Input, Low Pin Count, Synchronous Buck Controller with Power Good DC DC Cntrlr Single-OUT Sync Buck 4.5V to 18V Input 10Pin VSON EP T/R
TI
TEXAS INSTRUMENTS TPS40192DRCTG4 DC-DC Controller, Voltage Mode, 4.5V to 18V, 1 Output, Synchronous Buck, 700kHz, SON-10
TI
10A, 12V Input, 1.8V Output Synchronous Buck Converter using the TPS40192 and NexFET™ MOSFETs
TI
TEXAS INSTRUMENTS TPS40192EVM-001 Evaluation Board, Synchronous Buck Converter, Input 8V-14V, 1.8V Output, Adjustable With Resistor
TI
4.5V to 18V Input, Low Pin Count, Synchronous Buck Controller with Power Good 10-VSON -40℃ to 85℃
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
